HERLONG, CA —
OSHA Inspection: U.S. DEPT. OF JUSTICE-FEDERAL BUREAU OF PRISONS-FEDERAL CORRECTIONAL INSTITUTION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of U.S. DEPT. OF JUSTICE-FEDERAL BUREAU OF PRISONS-FEDERAL CORRECTIONAL INSTITUTION in 741-925 HERLONG ACCESS ROAD A-25, HERLONG, CA 96113 (NAICS 922140). OSHA activity number 338990419.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Site address
- 741-925 HERLONG ACCESS ROAD A-25
- City
- HERLONG
- State
- CA
- ZIP
- 96113
- Mailing
- FCI HERLONG P.O. BOX 900, HERLONG, CA 96113
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- Yes
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 922140
- Employees
- 300
- Ownership type
- D
Citations
6 citations on file for this inspection.
1910.178 A05
- Issued
- Apr 24, 2013
- Abate by
- Jun 11, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: Warehouse: On April 2, 2013, and at times prior thereto, a man basket attachment was not rated for use with the Clark forklifts.
Recent events (1)
- — Z (S) $0
1910.178 L04 III
- Issued
- Apr 24, 2013
- Abate by
- May 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: Warehouse: On April 2, 2013, and at times prior thereto, the employer did not ensure that employees were provided with refresher training every three years.
Recent events (1)
- — Z (S) $0
1910.212 A01
- Issued
- Apr 24, 2013
- Abate by
- May 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Garage: On April 2, 2013, and at times prior thereto, the following equipment was not efficiently guarded to prevent unintentional contact; A. Smithy Granite 1324 Horizontal Lathe (s/n14779) B. Delta X5 Drill Press (s/n 011737W5011)
Recent events (1)
- — Z (S) $0
1910.215 A04
- Issued
- Apr 24, 2013
- Abate by
- May 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: Garage: On April 2, 2013, and at times prior thereto, the adjustable work rest on the bench grinders exceeded one eighth inch from the abrasive wheel.
Recent events (1)
- — Z (S) $0
1910.215 B09
- Issued
- Apr 24, 2013
- Abate by
- May 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: Garage: On April 2, 2013, and at times prior thereto, the adjustable tongue guard on the bench grinders exceededone fourth inch from the abrasive wheel.
Recent events (1)
- — Z (S) $0
1910.37 B05
- Issued
- Apr 24, 2013
- Abate by
- May 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(5): Each doorway or passage along an exit access that could be mistaken for an exit was not marked "Not an Exit" or similar designation, or be identified by a sign indicating its actual use (e.g. closet): Main Kitchen, Dishwashing Room: On April 2, 2013, and at times prior thereto, a door leading to a chemical storage room, which could be mistaken as an exit, was unlabeled.
Recent events (1)
- — Z (O) $0
More inspections at U.S. Dept. of Justice-Federal Bureau of Prisons-Federal Correctional Institution
More inspections in this industry (NAICS 922140)
More inspections in CA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338990419.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.