Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,288Inspections Most recent open 2026-07-24 Last loaded 2026-07-29

OSHA Inspection: ADAR STEEL INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of ADAR STEEL INC. in 2216 AVENUE L, BROOKLYN, NY 11210 (NAICS 236115). OSHA activity number 339105249.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Adar Steel INC. — free Get an email when a new federal OSHA severe-injury report for Adar Steel INC. is published. One employer, no account, unsubscribe in one click.
Establishment
ADAR STEEL INC.
Site address
2216 AVENUE L
City
BROOKLYN
State
NY
ZIP
11210
Mailing
3605 AVENUE K, BROOKLYN, NY 11210
Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236115
Employees
4
Ownership type
A

6 citations on file for this inspection.

1926.404 B01 I

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 20, 2013
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.404(b)(1)(i): Employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites.     Location: 2216 Avenue L Brooklyn NY.  On or About: 06/06/13  a) The Circular Saw being used by the employees was not provided with a GFCI protection or an assured equipment grounding program.
Recent events (1)
  • — Z (S) $2000

1926.404 F06

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 20, 2013
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous.  Location: 2216 Avenue L Brooklyn NY.  On or About: 06/06/13   a)The orange 25 feet extension cord use to energize the Circular Saw was missing the ground pin.
Recent events (1)
  • — Z (S) $2000

1926.451 B01 I

Serious Gravity 5 2 instances 3 exposed
Issued
Sep 20, 2013
Penalty
Initial $2,400 · Current $2,400
29 CFR 1926.451(b)(1)(i): Each platform unit (e.g., scaffold plank, fabricated plank, fabricated deck, or fabricated platform) was not installed so that the space between adjacent units and the space between the platform and the uprights were no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary.   Location: 2216 Avenue L Brooklyn NY.  On or About: 06/06/13  a) Two employees were framing a roof from  tubular welded frame scaffolds that were not fully planked.
Recent events (1)
  • — Z (S) $2400

1926.451 G01 VII

Serious Gravity 10 2 instances 3 exposed
Issued
Sep 20, 2013
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section.   Location: 2216 Avenue Brooklyn, NY.   On or about: 06/06/13   a) Two employees were installing ceiling joist from a tubular welded frame scaffold that was not provided with any fall protection system.  The employees were exposed to a potential fall hazard of up to 20 feet to the ground below.  b) Employees were working from an approximately 20 feet high scaffold platform that was not provided with fall protection.
Recent events (1)
  • — Z (S) $2800

1926.454 A

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 20, 2013
Abate by
Oct 9, 2013
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.  Location: 2216 Avenue L Brooklyn NY.  On or About: 06/06/13   a) Employees were not trained on scaffolds hazards. Two employees were working by the edge of a woking platform without any fall protection while exposed to a potential fall of approximately 20 feet to ground below.
Recent events (1)
  • — Z (S) $2800

1926.501 B04 I

Serious Gravity 5 1 instance 4 exposed
Issued
Sep 20, 2013
Penalty
Initial $2,400 · Current $2,400
29 CFR 1926.501(b)(4)(i): Each employee on walking/working surfaces shall be protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes.   Location: 2216 Avenue Brooklyn, NY.   On or about: 06/06/13   a) Employees walked and worked near the a floor hole located at the front entrance of the house.
Recent events (1)
  • — Z (S) $2400

View Adar Steel INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339105249.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.