CHICAGO, IL —
OSHA Inspection: W. E. T. CONSTRUCTION LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of W. E. T. CONSTRUCTION LLC in 5711 N. KIMBALL AVE., CHICAGO, IL 60659 (NAICS 238140). OSHA activity number 339815243.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- W. E. T. CONSTRUCTION LLC
- Site address
- 5711 N. KIMBALL AVE.
- City
- CHICAGO
- State
- IL
- ZIP
- 60659
- Mailing
- 2420 W. PALMER ST., CHICAGO, IL 60647
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 8
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.100 A
- Issued
- Jun 24, 2014
- Penalty
- Initial $1,760 · Current $880 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns: a) Employees were not wearing protective helmets where there was a possible danger of head injury. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $880
- — Z (S) $1760
1926.451 B01
- Issued
- Jun 24, 2014
- Abate by
- Jun 30, 2014
- Penalty
- Initial $3,080 · Current $1,540 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii): a) Employees were exposed to the hazard of falling approximately 40 feet to the ground, while performing stucco work from tubular welded frame scaffold platform that was not fully planked. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $1540
- — Z (S) $3080
1926.451 C01 II
- Issued
- Jun 24, 2014
- Abate by
- Jun 30, 2014
- Penalty
- Initial $2,200 · Current $1,100 Reduced
General-duty citation text
29 CFR 1926.451(c)(1)(ii): Guys, ties, and/or braces were not installed according to the scaffold manufacturer's recommendations or at the closest horizontal member to the 4:1 height and repeated vertically at locations of horizontal members every 20 feet (56.1 m) or less thereafter for scaffolds 3 feet ((0.91 m) wide or less, and every 26 feet (7.9 m) or less thereafter for scaffolds greater than 3 feet (0.91m) wide: a) Employees were working from a tubular welded frame scaffold that was seven frames high and was not tied to the building. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1100
- — Z (S) $2200
1926.451 C02
- Issued
- Jun 24, 2014
- Abate by
- Jun 30, 2014
- Penalty
- Initial $2,200 · Current $1,100 Reduced
General-duty citation text
29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames, and uprights did not bear on base plates and mud sills or other adequate firm foundation: a) The scaffold that the employees were working from did not bear on base plates. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1100
- — Z (S) $2200
1926.451 C02 II
- Issued
- Jun 24, 2014
- Abate by
- Jun 30, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(c)(2)(ii): Unstable objects were used to support scaffolds or platform units: a) Employees were performing stucco work from tubular welded frame scaffolding that was supported by unstable objects. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 G01
- Issued
- Jun 24, 2014
- Abate by
- Jun 30, 2014
- Penalty
- Initial $3,080 · Current $1,540 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level. a) Employees were exposed to the hazard of falling approximately 40 feet to the ground, while performing stucco work from tubular welded frame scaffold platform. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $1540
- — Z (S) $3080
1926.454 A
- Issued
- Jun 24, 2014
- Abate by
- Jul 28, 2014
- Penalty
- Initial $4,400 · Current $0 Reduced
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards: a) Employer did not provide training to each employee in order to recognize hazards associated with working from tubular welded frame scaffolding and to understand procedures to control or minimize those hazards. W. E. T. Construction LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.454(a), which was contained in OSHA inspection number 617258, citation number 1, item number 2a and was affirmed as a final order on October 5, 2012, with respect to a workplace located at 2825 W. Diversey Ave., Chicago, IL 60618. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (R) $0
- — Z (R) $4400
More inspections at W. E. T. Construction LLC
View W. E. T. Construction LLC's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339815243.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.