PEORIA, IL —
OSHA Inspection: LANGSTON BAG OF PEORIA, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of LANGSTON BAG OF PEORIA, LLC in 1114 SW ADAMS, PEORIA, IL 61604 (NAICS 322224). OSHA activity number 339920852.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LANGSTON BAG OF PEORIA, LLC
- Site address
- 1114 SW ADAMS
- City
- PEORIA
- State
- IL
- ZIP
- 61604
- Mailing
- 1114 SW ADAMS, PEORIA, IL 61604
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322224
- Employees
- 65
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 II D
- Issued
- Feb 6, 2015
- Abate by
- Mar 5, 2015
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(D): The energy control procedures did not clearly and specifically outline the requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control measures: Employees were exposed to hazardous energy while performing service and maintenance activities on machines and the employer did not develop and implement procedures for testing the machines before work began.
Recent events (2)
- — I (S) $0
- — Z (S) $5000
1910.147 F03 II D
- Issued
- Feb 6, 2015
- Abate by
- Mar 5, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: When group lockout of machines and equipment were required during service and maintenance of machines and equipment, only one employee utilized a lock to lock the equipment out.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 C02 I
- Issued
- Feb 6, 2015
- Abate by
- Mar 5, 2015
- Penalty
- Initial $6,000 · Current $6,000
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: Employees operating the Model 1000 Automatic Feeder machine #203 were exposed to becoming entangled in smooth rotating shafts and the employer did not ensure that the shafts were adequately guarded: a. The horizontal smooth rotating shaft near the front of the machine that provided power to the belts that feed the bags into the machine was not guarded. b. The horizontal smooth rotating shaft near the rear of the machine that provided power to the belts that moved the completed bags out of the machine was not guarded.
Recent events (2)
- — I (S) $6000
- — Z (S) $6000
1910.219 D01
- Issued
- Feb 6, 2015
- Abate by
- Mar 5, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): Employees operating the Model 1000 Automatic Feeder machine #203 were exposed to in-going nip points and the employer did not ensure that belts and pulleys were adequately guarded: a. The belt and pulley near the front of the machine that fed the bags into the machine was not guarded. b. The belt and pulley near the rear of the machine that moved the completed bags out of the machine was not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Feb 6, 2015
- Abate by
- Mar 5, 2015
- Penalty
- Initial $3,000 · Current $3,000
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Employees operating the Model 1000 Automatic Feeder machine #203 were exposed to being struck by moving parts and the employer did not ensure that the machines' lower portion of the sewing machine was adequately guarded.
Recent events (2)
- — I (S) $3000
- — Z (S) $3000
1910.212 A03 II
- Issued
- Feb 6, 2015
- Abate by
- Mar 5, 2015
- Penalty
- Initial $7,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): Employees operating the bag sewing machine #203 were exposed to amputation hazards and the employer did not ensure that the machines' pneumatic cutting blade was adequately guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $7000
More inspections at Langston BAG of Peoria, LLC
View Langston BAG of Peoria, LLC's full OSHA safety record →
More inspections in this industry (NAICS 322224)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339920852.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.