Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MASTER MAGNETICS INC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of MASTER MAGNETICS INC in 4501 COUNTY ROAD 102, ELBERT, CO 80106 (NAICS 332999). OSHA activity number 340213925.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Master Magnetics INC — free Get an email when a new federal OSHA severe-injury report for Master Magnetics INC is published. One employer, no account, unsubscribe in one click.
Site address
4501 COUNTY ROAD 102
City
ELBERT
State
CO
ZIP
80106
Mailing
4501 COUNTY ROAD 102, ELBERT, CO 80106
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
85
Ownership type
A

3 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 3 exposed
Issued
Feb 9, 2015
Abate by
Mar 31, 2015
Penalty
Initial $3,500 · Current $1,750 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm:    a)  On or about January 26, 2015 and times prior to that date, employees were exposed to "struck by" hazards from steel storage racks that did not have the base plates on storage rack columns anchored to the floor.    Abatement Note:     Among other methods, one feasible and acceptable method of abatement would be to follow the requirements of the owners manual which states that every column footplate of each pallet rack installation must be properly anchored to the floor.
Recent events (2)
  • — I (S) $1750
  • — Z (S) $3500

1910.23 C01

Serious Gravity 5 1 instance 3 exposed
Issued
Feb 9, 2015
Abate by
Mar 6, 2015
Penalty
Initial $3,500 · Current $2,450 Reduced
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:    Note:  Toeboards are only required when persons can pass, there is moving equipment or there is equipment with which falling materials could create a hazard:    (a)  On or about January 26, 2015, and times prior to that date, employees were exposed to potential fall hazards in excess of four feet, where they were dismantling an Interlake storage system by working from the shelves without the benefit of a guard rail system or equivalent being in place.
Recent events (2)
  • — I (S) $2450
  • — Z (S) $3500

1910.178 O01

Serious Gravity 10 1 instance 3 exposed
Issued
Feb 9, 2015
Abate by
Feb 13, 2015
Penalty
Initial $4,900 · Current $4,900
29 CFR 1910.178(o)(1): Load(s) on powered industrial truck(s) were not stable or safely arranged:  (a)  On or about January 26, 2015, and times prior to that date, the employer did not ensure the loads placed on the powered industrial truck were stable or safely arranged, which caused the load to fall and strike an employee, which resulted in serious injuries.
Recent events (2)
  • — I (S) $4900
  • — Z (S) $4900

View Master Magnetics INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340213925.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.