Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DAYTON SUPERIOR CORPORATION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of DAYTON SUPERIOR CORPORATION in 55 NORTH PINE STREET, TREMONT, PA 17981 (NAICS 331222). OSHA activity number 340610179.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Dayton Superior Corporation — free Get an email when a new federal OSHA severe-injury report for Dayton Superior Corporation is published. One employer, no account, unsubscribe in one click.
Site address
55 NORTH PINE STREET
City
TREMONT
State
PA
ZIP
17981
Mailing
55 NORTH PINE STREET, TREMONT, PA 17981
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331222
Employees
61
Ownership type
A

4 citations on file for this inspection.

1910.212 A03 II

Serious Gravity 5 1 instance 1 exposed
Issued
Oct 22, 2015
Abate by
Nov 18, 2015
Penalty
Initial $3,400 · Current $3,400
29 CFR 1910.212(a)(3)(ii): The  point of operation of machines whose operation exposed an employee to injury, was not guarded:  (a) Tool and Die Area -  Employees were using the #108 Do All contour band saw with an unguarded 2 inch section of the moving blade, exposing employees to a potentially serious injury while cutting metal, wood or plastic parts, observed on or about 5-5-15.   Abatement certification required.
Recent events (2)
  • — I (S) $3400
  • — Z (S) $3400

1910.255 B05

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Oct 22, 2015
Abate by
Nov 18, 2015
Penalty
Initial $2,805 · Current $0 Reduced
29 CFR 1910.255(b)(5): The hazard of flying sparks was not, wherever practical, eliminated by installing a shield guard of safety glass or suitable fire resistant plastic at the point of operation:  (a) First Weld Position - Employees were performing resistance welding on metal parts and there was no guard in place to protect the employees from flying sparks, observed on or about 5-5-15.   Abatement certification required
Recent events (2)
  • — I (S) $0
  • — Z (S) $2805

1910.147 C06 II

Deleted Other-than-serious 1 instance 43 exposed
Issued
Oct 22, 2015
Abate by
Dec 10, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed:  (a)  Throughout Facility:  A certification that a periodic inspection of the Lock Out Tag Out procedures had been performed were not available for inspection, on or about 5-5-15.  Abatement certification required.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.22 A01

Other-than-serious 1 instance 5 exposed
Issued
Oct 22, 2015
Abate by
Nov 25, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition.  a)  Wire Drawing Area: An operator in the area works near a small amount of dust on the floor and nearby machine and a small amount of dust near the Aercology C-8 dust filter where a hose on the filter is broken and was not repaired, allowing a build up of particles on a part of the machine and the floor, observed on or about 5-5-15.  Abatement certification required.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Dayton Superior Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340610179.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.