Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: IVEX PROTECTIVE PACKAGING INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of IVEX PROTECTIVE PACKAGING INC. in 456 S. STOLLE DRIVE, SIDNEY, OH 45365 (NAICS 326150). OSHA activity number 340645340.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ivex Protective Packaging INC. — free Get an email when a new federal OSHA severe-injury report for Ivex Protective Packaging INC. is published. One employer, no account, unsubscribe in one click.
Site address
456 S. STOLLE DRIVE
City
SIDNEY
State
OH
ZIP
45365
Mailing
456 S. STOLLE DRIVE, SIDNEY, OH 45365
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326150
Employees
64
Ownership type
A

2 citations on file for this inspection.

1910.212 A01

Repeat Gravity 10 2 instances 6 exposed
Issued
Oct 28, 2015
Abate by
Nov 10, 2015
Penalty
Initial $10,780 · Current $7,007 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    a) On or about May 20, 2015 the employer did not ensure the polyplanker hot air laminator line #2 was properly guarded to prevent employees exposures to in-going nip points while hand feeding foams sheets through the top rollers of the polyplanker laminator.       b) On or about May 20, 2015 the employer did not ensure that the rotating shaft of the rip saw on the left side of the line #1 Polyplanker hot air laminator was properly guarded. Employees were exposed to caught in hazards during set up procedures where employees must come within close proximity to the rotating shaft as they feed foam through the rip saw.       IVEX Protective Packaging Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.212(a)(1) which was contained in OSHA Inspection Number 850603, citation number 1,  item number 21/a and was affirmed as a final order on August 12, 2013, with respect to a workplace located at 456 South Stolle Drive in Sidney, Ohio 45365.
Recent events (2)
  • — I (R) $7007
  • — Z (R) $10780

1910.212 A03 II

Repeat Gravity 10 2 instances 6 exposed
Issued
Oct 28, 2015
Abate by
Nov 25, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):    a) IVEX Protective Packaging, Sidney, Ohio; On or about May 20, 2015, the employer did not ensure that employees were protected from the point of operation when operating the line #1 Polyplanker hot air laminator. Employees feeding foam sheet into the rip saws during set-up activities were exposed to injuries such as but not limited to amputations and lacerations.          b) IVEX Protective Packaging, Sidney, Ohio; On or about May 20, 2015, the employer did not ensure that employees were protected from the point of operation when operating the line #1 Polyplanker hot air laminator. Employees placed beverages and tools on the metal foam guide located within approximately one inch of the automated cross cut blade.    IVEX Protective Packaging Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.212(a)(3)(ii) which was contained in OSHA Inspection Number 850603, citation number 1,  item number 21/b and was affirmed as a final order on August 12, 2013, with respect to a workplace located at 456 South Stolle Drive in Sidney, Ohio 45365.
Recent events (2)
  • — I (R) $0
  • — Z (R) $0

View Ivex Protective Packaging INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340645340.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.