Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MARAGOS CONSTRUCTION, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MARAGOS CONSTRUCTION, INC. in 111 N. LINCOLN AVE., PARK RIDGE, IL 60068 (NAICS 238130). OSHA activity number 340805050.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Maragos Construction, INC. — free Get an email when a new federal OSHA severe-injury report for Maragos Construction, INC. is published. One employer, no account, unsubscribe in one click.
Site address
111 N. LINCOLN AVE.
City
PARK RIDGE
State
IL
ZIP
60068
Mailing
8665 W. FOSTER AVE., CHICAGO, IL 60656
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
14
Ownership type
A

5 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 16, 2015
Abate by
Sep 22, 2015
Penalty
Initial $1,600 · Current $1,000 Reduced
29 CFR 1926.100(a):  Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:       a)  Employees were not wearing protective helmets where there was a possible danger of head injury.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1000
  • — Z (S) $1600

1926.102 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 16, 2015
Abate by
Sep 22, 2015
Penalty
Initial $1,600 · Current $1,000 Reduced
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents:       a) Employees were exposed to eye injury while operating a pneumatic nail gun without eye protection during carpentry work.       In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1000
  • — Z (S) $1600

1926.416 A01

Serious Gravity 5 1 instance 6 exposed
Issued
Sep 16, 2015
Abate by
Sep 22, 2015
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1926.416(a)(1): Employees were permitted to work in proximity to electric power circuits and were not protected against electric shock by de-energizing and grounding the circuits or effectively guarding the circuits by insulation or other means:       a)  Employees were not protected against accidental contact with energized overhead power lines during carpentry work.  The overhead power lines consisted of secondary lines having a voltage rating of 120/240 volts.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1926.501 B13

Serious Gravity 10 1 instance 5 exposed
Issued
Sep 16, 2015
Penalty
Initial $2,800 · Current $1,000 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):        a)  Employees engaged in carpentry work were not protected from fall hazards while working at an elevation of approximately 21 feet above the ground.        No abatement certification or documentation is required for this item.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2800

1926.1053 B01

Serious Gravity 5 1 instance 6 exposed
Issued
Sep 16, 2015
Penalty
Initial $1,600 · Current $1,000 Reduced
29 CFR 1926.1053(b)(1): Where (a) portable ladder(s) was/were used for access to an upper level landing surface and the ladder's length did not allow the ladder side rails to extend at least 3 feet (0.9 m) above the upper landing surface being accessed, the ladder was not secured at its top to a rigged support that will not deflect, and/or a grasping device was not provided to assist employees in mounting and dismounting the ladder:       a)  An extension ladder used by employees to gain access to the working surface was not long enough to have it's side rails extend at least 3 feet above the surface.        No abatement certification or documentation is required for this item.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $1600

View Maragos Construction, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340805050.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.