ALLENTOWN, PA —
OSHA Inspection: QUICK CARPENTRY, INC.
Special Programs inspection · Safety discipline
At a glance
On , OSHA opened a special Programs safety inspection of QUICK CARPENTRY, INC. in WOODMONT RIDGE AT UPPER MACUNGIE 5265 ROCKROSE LANE, ALLENTOWN, PA 18104 (NAICS 238130). OSHA activity number 341309169.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- QUICK CARPENTRY, INC.
- Site address
- WOODMONT RIDGE AT UPPER MACUNGIE 5265 ROCKROSE LANE
- City
- ALLENTOWN
- State
- PA
- ZIP
- 18104
- Mailing
- 4501 BLEIGH AVE, PHILADELPHIA, PA 19136
What kind of inspection was it?
- Inspection type
- Special Programs (K)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 11
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.501 B13
- Issued
- Mar 30, 2016
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) Quick Carpentry Inc. - On or about February 26, 2016, employees performing framing activities on Apartment building G #6 were exposed to fall hazards more than 6 feet above a lower level near the stairway area of Third Floor, Apartment A33. b) Quick Carpentry Inc. - On or about February 26, 2016, employees performing framing activities on Apartment building G #6 were exposed to fall hazards more than 6 feet above a lower level near the stairway area of Third Floor, Apartment A37.
Recent events (1)
- — Z (S) $2800
1926.503 A02
- Issued
- Mar 30, 2016
- Abate by
- Apr 14, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(2): The employer did not assure that each employee exposed to fall hazards was trained by a competent person qualified in the areas specified in 29 CFR 1926.503 (a)(2)(i) through (viii). a) Quick Carpentry Inc. - On or about February 26, 2016, the employer did not assure that each employee exposed to fall hazards while performing framing activities was trained by a competent person.
Recent events (1)
- — Z (S) $0
1926.1052 C04
- Issued
- Mar 30, 2016
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.1052(c)(4): Midrails, screens, mesh, intermediate vertical members, or equivalent intermediate structural members were not provided between the top rail of the stairrail system and the stairway steps: a) Quick Carpentry Inc. - On or about February 26, 2016, a mid-rail was not installed between the top rail of the stair rail system and the stairway steps that were positioned from the first floor leading to the landing area near the second floor apartment A23.
Recent events (1)
- — Z (S) $1600
1926.1052 C07
- Issued
- Mar 30, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1052(c)(7): The top edge of a stairrail system served as a handrail and the height of the top edge was more than 37 inches (94 cm) from the upper surface of the stairrail system to the surface of the tread, in line with the face of the riser at the forward edge of the tread. a) Quick Carpentry Inc. - On or about February 26, 2016, the top edge of the stair rail system positioned in the area from Apartment A14 to Apartment A23 served as a handrail and the height of the top edge was more than 37 inches (94 cm) from the upper surface of the stair rail system to the surface of the tread. b) Quick Carpentry Inc. - On or about February 26, 2016, the top edge of the stair rail system positioned in the area from Apartment A18 to Apartment A27 served as a handrail and the height of the top edge was more than 37 inches (94 cm) from the upper surface of the stair rail system to the surface of the tread.
Recent events (1)
- — Z (S) $0
More inspections at Quick Carpentry, INC.
View Quick Carpentry, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341309169.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.