Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: OILEX, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of OILEX, INC. in 421 W. 29TH ST., PUEBLO, CO 81008 (NAICS 811191). OSHA activity number 341380293.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Oilex, INC. — free Get an email when a new federal OSHA severe-injury report for Oilex, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
OILEX, INC.
Site address
421 W. 29TH ST.
City
PUEBLO
State
CO
ZIP
81008
Mailing
3525 S. TAMARAC DR. STE. 222, DENVER, CO 80237
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811191
Employees
9
Ownership type
A

7 citations on file for this inspection.

1910.215 A04

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 1, 2016
Abate by
Jun 7, 2016
Penalty
Initial $2,100 · Current $1,050 Reduced
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:      a) On or about April 6, 2016 and at times prior, employees were required to use a bench grinder. The work rest of the bench grinder had an opening of approximately one inch.
Recent events (2)
  • — I (S) $1050
  • — Z (S) $2100

1910.215 B09

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 1, 2016
Abate by
Jun 7, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:   a) On or about April 6, 2016 and at times prior, employees were required to use a bench grinder. The tongue guard of the bench grinder had an opening of approximately one inch.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.253 B04 III

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 1, 2016
Abate by
Jun 7, 2016
Penalty
Initial $2,100 · Current $1,050 Reduced
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour:      a) On or about April 6, 2016 and at times prior, employees were exposed to fire hazards from an oxygen and acetylene cylinder that were stored together in the shop area.
Recent events (2)
  • — I (S) $1050
  • — Z (S) $2100

1910.1200 E01 I

Serious Gravity 1 1 instance 2 exposed
Issued
Jun 1, 2016
Abate by
Jun 7, 2016
Penalty
Initial $2,100 · Current $1,050 Reduced
29 CFR 1910.1200(e)(1)(i): The written hazard communication program did not include a list of the hazardous chemicals known to be present, using an identity that was referenced on the appropriate material safety data sheet:      a) On or about April 6, 2016 and at times prior, employees were required to use hazardous chemicals in the workplace. The written hazard communication program did not include a list of the hazard chemicals including, but not limited to:    1. Chemtool carburetor cleaner - contains toluene, acetone, and methanol   2. Carquest brake cleaner - contains tetrachloroethylene and trichloroethylene
Recent events (2)
  • — I (S) $1050
  • — Z (S) $2100

1910.1200 F05 II

Serious Gravity 1 1 instance 2 exposed
Issued
Jun 1, 2016
Abate by
Jun 7, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(5)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the appropriate hazard warnings:   a) On or about April 6, 2016 and at times prior, employees were required to use hazardous chemicals in the workplace. The containers of hazardous chemicals in the workplace were not labeled, tagged, or marked with the appropriate hazard warnings of the hazard chemicals including, but not limited to:  1. Antifreeze - contains ethylene glycol  2. Degreaser - contains tetrachloroethylene
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 G08

Serious Gravity 1 1 instance 2 exposed
Issued
Jun 1, 2016
Abate by
Jun 7, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s)   a) On or about April 6, 2016 and at times prior, employees were required to use hazardous chemicals in the workplace. The safety data sheets of the hazardous chemicals were not readily accessible to the employees including, but not limited to:  1. Chemtool carburetor cleaner - contains toluene, acetone, and methanol  2. Carquest brake cleaner - contains tetrachloroethylene and trichloroethylene
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.22 A01

Other-than-serious 1 instance 2 exposed
Issued
Jun 1, 2016
Penalty
Initial $700 · Current $350 Reduced
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition.      1) On or about April 6, 2016 and at times prior, employees were exposed to possible health illness from trash and debris left on the workplace. The break room and shop area were not kept clean and in a sanitary condition.
Recent events (2)
  • — I (O) $350
  • — Z (O) $700

View Oilex, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341380293.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.