MANSFIELD, OH —
OSHA Inspection: NEWMAN TECHNOLOGY, INC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of NEWMAN TECHNOLOGY, INC in 100 CAIRNS ROAD, MANSFIELD, OH 44903 (NAICS 336370). OSHA activity number 343086054.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NEWMAN TECHNOLOGY, INC
- Site address
- 100 CAIRNS ROAD
- City
- MANSFIELD
- State
- OH
- ZIP
- 44903
- Mailing
- 100 CAIRNS ROAD, MANSFIELD, OH 44903
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336370
- Employees
- 890
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jun 1, 2018
- Penalty
- Initial $12,934 · Current $12,934
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: A) Newman Technology, Inc., located at 100 Cairns Road, Mansfield, OH 44903: On or about April 4, 2018, the employer did not utilize specific procedures to control hazardous energy of the equipment such as, but not limited to, the Pipe Bender # 13 located at the 1130 TLA Tank Mount Line. Employees did not control all hazardous energy sources such as, but not limited to, hydraulic while performing activities such as, but not limited to, making adjustments to the bender in order to adjust the bend shape of the pipes. Employees were exposed to amputation hazards while all hazardous energy sources were not controlled while conducting work.
Recent events (1)
- — Z (S) $12934
1910.147 D
- Issued
- Jun 1, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) covered the following elements, however, the actions were not done in sequence as required by 29 CFR 1910.147 (d)(1)-(6): A) Newman Technology, Inc., located at 100 Cairns Road, Mansfield, OH 44903: On or about April 4, 2018, the employer did not ensure that all the steps outlined in 29 CFR 1910.147(d) and required for the control of the hazardous energy sources such as, but not limited to, hydraulic were followed while employees conducted activities such as, but not limited to, making adjustments to the equipment such as, but not limited to, the Pipe Bender # 13 located at the 1130 TLA Tank Mount Line in order to adjust the bend shape of the pipes. Employees were exposed to amputation hazards while all hazardous energy sources were not controlled while conducting work. As a result, the remaining applicable energy control elements, involving machine isolation [1910.147(d)(3)], lock-out/tag-out device application [1910.147(d)(4)], dissipation of residual energy [1910.147(d)(5)], and verification of isolation [1910.147(d)(6)] were not implemented to protect employees from amputation hazards while employees conducted activities such as, but not limited to, making adjustments to the equipment such as, but not limited to, the Pipe Bender # 13 located at the 1130 TLA Tank Mount Line in order to adjust the bend shape of the pipes.
Recent events (1)
- — Z (S) $0
1910.147 C07 I
- Issued
- Jun 1, 2018
- Abate by
- Jun 12, 2018
- Penalty
- Initial $12,934 · Current $12,934
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: A) Newman Technology, Inc., located at 100 Cairns Road, Mansfield, OH 44903: On or about April 4, 2018, the employer did not train employees to control hazardous energy of the equipment such as, but not limited to, the Pipe Bender # 13 located at the 1130 TLA Tank Mount Line. Employees did not control all hazardous energy sources such as, but not limited to, hydraulic while employees were conducting activities such as, but not limited to, making adjustments to the bender in order to adjusting the bend shape of the pipes. Employees were exposed to amputation hazards while all hazardous energy sources were not controlled while conducting work.
Recent events (1)
- — Z (S) $12934
More inspections at Newman Technology, INC
View Newman Technology, INC's full OSHA safety record →
More inspections in this industry (NAICS 336370)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343086054.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.