Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: JFR CONSTRUCTION, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JFR CONSTRUCTION, INC. in LOT #31 BANBURY CROSSING, ALPHARETTA, GA 30009 (NAICS 238130). OSHA activity number 343334082.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch JFR Construction, INC. — free Get an email when a new federal OSHA severe-injury report for JFR Construction, INC. is published. One employer, no account, unsubscribe in one click.
Site address
LOT #31 BANBURY CROSSING
City
ALPHARETTA
State
GA
ZIP
30009
Mailing
8510 SCOTT HAMILTON DRIVE, LOT #19, LITTLE ROCK, AR 72209
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
10
Ownership type
A

4 citations on file for this inspection.

1910.178 L06

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 10, 2018
Abate by
Jan 7, 2019
Penalty
Initial $2,772 · Current $2,772
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l) of 29 CFR 1910.178:  (a) New residential construction on Lot #31, East side: On or about 07/25/2018, and at times prior, the employer allowed employees to operate rough terrain powered industrial forklift trucks without certification, evaluation, and training on the type of truck they were operating.
Recent events (1)
  • — Z (S) $2772

1926.451 C02 IV

Serious Gravity 10 1 instance 1 exposed
Issued
Dec 10, 2018
Penalty
Initial $3,880 · Current $3,880
29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use:  (a) New residential construction located on #31, East side: On or about 07/25/2018, and at times prior, The employer exposed employees to fall hazards of over 26-feet to the lower ground level, in that an employee was working from a makeshift work platform which was not approved or designed to be used with the Genie GTH-1056 All-Terrain Forklift Truck. The platform used was designed to store debris and not as a work platform attachment.
Recent events (1)
  • — Z (S) $3880

1926.451 C02 V

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 10, 2018
Penalty
Initial $0 · Current $0
29 CFR 1926.451(c)(2)(v): Fork-lifts were used to support scaffold platforms while the entire platform was not attached to the fork and the fork-lift was moved horizontally while the platform was occupied:  (a) New residential construction located on Lot #31, East side: On or about 07/25/2018, and at times prior, the employer exposed employees to fall hazards of over 26-feet to the lower level, in that the makeshift work platform was not secured to the forks to prevent accidental movement during framing activities as this equipment was used as a elevated scaffold attachment.
Recent events (1)
  • — Z (S) $0

1926.451 G01 VII

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 10, 2018
Penalty
Initial $2,772 · Current $2,772
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section:  (a) New residential construction located on Lot #31, East side: On or about 07/25/2018, and at times prior, the employer exposed employees to falls over 26-feet to the lower level, in that at fall protection system was not provided to employee working from a makeshift personnel platform resting on the forks to a Genie All-Terrain Forklift Truck.
Recent events (1)
  • — Z (S) $2772

View JFR Construction, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343334082.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.