WOLFFORTH, TX —
OSHA Inspection: SCOTT MANUFACTURING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SCOTT MANUFACTURING, INC. in 10609 FM 1585, WOLFFORTH, TX 79382 (NAICS 332313). OSHA activity number 343526372.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SCOTT MANUFACTURING, INC.
- Site address
- 10609 FM 1585
- City
- WOLFFORTH
- State
- TX
- ZIP
- 79382
- Mailing
- P.O. BOX 10232, LUBBOCK, TX 79408
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332313
- Employees
- 117
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.132 F01 V
- Issued
- Apr 5, 2019
- Abate by
- May 1, 2019
- Penalty
- Initial $6,819 · Current $4,091 Reduced
General-duty citation text
29 CFR 1910.132(f)(1)(v): Employee(s) required to use PPE by this section were not trained to know the proper care, maintenance, useful life, and disposal of the PPE: a) At the facility, where employees required to use personal fall protection when perform welding operations had not been trained to know the proper care, maintenance, useful life and disposal of the harnesses and lanyards.
Recent events (2)
- — I (S) $4091.4
- — Z (S) $6819
1910.179 J02
- Issued
- Apr 5, 2019
- Penalty
- Initial $6,819 · Current $4,091 Reduced
General-duty citation text
29 CFR 1910.179(j)(2): The items listed in subparagraphs (i)-(vii) were not be inspected for defects at daily, including observation during operation for any defects which might appear between regular inspections: a) At the facility, where the clip to the hook and the pendant control mechanisms of the overhead bridge crane had not been inspected daily.
Recent events (2)
- — I (S) $4091.4
- — Z (S) $6819
1910.184 H05 I
- Issued
- Apr 5, 2019
- Abate by
- May 1, 2019
- Penalty
- Initial $6,819 · Current $4,091 Reduced
General-duty citation text
29 CFR 1910.184(h)(5)(i): Natural or synthetic fiber rope sling(s) with abnormal wear were not immediately removed from service: a) At the facility, damaged rope slings with broken and cut fibers were not immediately removed from service.
Recent events (2)
- — I (S) $4091.4
- — Z (S) $6819
1910.305 G02 III
- Issued
- Apr 5, 2019
- Abate by
- May 1, 2019
- Penalty
- Initial $6,819 · Current $4,091 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: a) At the facility, where a Makita sander/grinder lacked strain relief, exposing uninsulated, covered conductors.
Recent events (2)
- — I (S) $4091.4
- — Z (S) $6819
1910.151 C
- Issued
- Apr 5, 2019
- Abate by
- May 1, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) In the Main Shop, on Column 318 the emergency eye wash was not functioning. b) In the Middle Shop, on Column 804 the emergency eye wash was not functioning. c) On the West/South side of storage the emergency eye wash was not functioning.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.184 H01
- Issued
- Apr 5, 2019
- Abate by
- May 1, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(h)(1): Natural and synthetic fiber-rope slings did not have permanently affixed and legible identification markings stating the rated capacity for the type(s) of hitch(es) used and the angle upon which it was based, type of fiber material, and the number of legs if more than one: a) At the facility, where the slings used to move heavy metal products did not have legible identification markings.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Scott Manufacturing, INC.
View Scott Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332313)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343526372.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.