WOLFFORTH, TX —
OSHA Inspection: SCOTT MANUFACTURING, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of SCOTT MANUFACTURING, INC. in 10609 FM 1585, WOLFFORTH, TX 79382 (NAICS 332313). OSHA activity number 343527396.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SCOTT MANUFACTURING, INC.
- Site address
- 10609 FM 1585
- City
- WOLFFORTH
- State
- TX
- ZIP
- 79382
- Mailing
- P.O. BOX 10232, LUBBOCK, TX 79408
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332313
- Employees
- 117
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 C02 I
- Issued
- Apr 5, 2019
- Abate by
- May 1, 2019
- Penalty
- Initial $7,501 · Current $4,501 Reduced
General-duty citation text
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: a) At the facility, the employer did not ensure employees that wore respirators voluntarily were provided with the information contained in Appendix D.
Recent events (2)
- — I (S) $4500.6
- — Z (S) $7501
1910.134 C02 II
- Issued
- Apr 5, 2019
- Abate by
- May 1, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(ii): The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user: a) At the facility, the employer did not implement the elements in the written respiratory program, including medical evaluations, for employees who wore respirators voluntarily.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 C04
- Issued
- Apr 5, 2019
- Abate by
- May 1, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(4): The employer did not provide respirators, training, and medical evaluations at no cost to employees: a) At the facility, employees who wore respirators voluntarily had not been provided training and medical evaluation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 G01 I A
- Issued
- Apr 5, 2019
- Abate by
- May 1, 2019
- Penalty
- Initial $7,501 · Current $4,501 Reduced
General-duty citation text
29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function: a) At the facility, an employee with facial hair wore a half mask tight-fitting respirator while spray painting.
Recent events (2)
- — I (S) $4500.6
- — Z (S) $7501
1910.253 B02 IV
- Issued
- Apr 5, 2019
- Abate by
- May 1, 2019
- Penalty
- Initial $5,626 · Current $3,376 Reduced
General-duty citation text
29 CFR 1910.253(b)(2)(iv): Valve protection caps, where cylinders were designed to accept caps, were not always in place, hand-tight, except when cylinders were in use or connected for use: a) At the facility, compressed gas cylinders in the storage area were stored without a valve protection cap in place, exposing employees to fire hazards.
Recent events (2)
- — I (S) $3375.6
- — Z (S) $5626
1910.1200 H
- Issued
- Apr 5, 2019
- Abate by
- May 1, 2019
- Penalty
- Initial $7,501 · Current $4,501 Reduced
General-duty citation text
29 CFR 1910.1200(h): Employees were not provided effective information and training as specified in 29 CFR 1910.1200(h)(1) and (2) on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard was introduced in the workplace: a) At the facility, employees had not been provided effective information and training on hazardous chemicals in their work areas. Employees use hazardous substances such as welding wire containing iron, manganese, silicon, titanium dioxide chromium, nickel, zirconium oxide, chromium(IV) and titanium.
Recent events (2)
- — I (S) $4500.6
- — Z (S) $7501
More inspections at Scott Manufacturing, INC.
View Scott Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332313)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343527396.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.