SNOQUALMIE, WA —
OSHA Inspection: SNOQUALMIE ENTERTAINMENT AUTHORITY DBA SNOQUALMIE CASINO
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of SNOQUALMIE ENTERTAINMENT AUTHORITY DBA SNOQUALMIE CASINO in 37500 SE NORTH BEND WAY, SNOQUALMIE, WA 98065 (NAICS 713210). OSHA activity number 343652137.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Site address
- 37500 SE NORTH BEND WAY
- City
- SNOQUALMIE
- State
- WA
- ZIP
- 98065
- Mailing
- 37500 SE NORTH BEND WAY, SNOQUALMIE, WA 98065
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 713210
- Employees
- 1000
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.22 B
- Issued
- Apr 16, 2019
- Abate by
- Jun 3, 2019
- Penalty
- Initial $5,683 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.22(b): The employer/ building official had marked or posted the maximum intended load capacity for every walking - working surface that was being used for storage purposes. A) In the grounds shop the employer did not provide or post the load rating for a storage loft that was directly over areas where employees worked.
Recent events (2)
- — I (O) $3500
- — Z (S) $5683
1910.212 A01
- Issued
- Apr 16, 2019
- Abate by
- Jun 3, 2019
- Penalty
- Initial $7,577 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: A) In the maintenance shop, there was a horizontal band saw that did not have its blade guards adjusted to the width of the material being cut, leaving parts of the blade exposed.
Recent events (2)
- — I (S) $0
- — Z (S) $7577
1910.215 A04
- Issued
- Apr 16, 2019
- Abate by
- Jun 3, 2019
- Penalty
- Initial $5,683 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: A) In the grounds shop, there was a bench grinder where the work rest had been pulled 7/8 of an inch from the surface fo the wheel.
Recent events (2)
- — I (S) $4000
- — Z (S) $5683
1910.303 G01 I A
- Issued
- Apr 16, 2019
- Penalty
- Initial $5,683 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.303(g)(1)(i)(A): For electric equipment operating at 600 volts, nominal, or less to ground, and likely to require examination, adjustment, servicing, or maintenance while energized, the depth of the working space in the direction of access to live parts (as measured from the live parts where they were exposed or from the enclosure front or opening whwere they were enclosed) was less than indicated in Table S-1 of Subpart S of Part 1910: A) In the bakery section of the main kitchen, the main electrical breaker panel was completely obscured by stored racks, and other materials.
Recent events (2)
- — I (S) $3500
- — Z (S) $5683
1910.1200 F05
- Issued
- Apr 16, 2019
- Abate by
- Jun 3, 2019
- Penalty
- Initial $5,683 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.1200(f)(5): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity and appropriate hazard warnings regarding the chemicals contained therein: A) in the maintenance shop and the grounds shop there were spray bottles with colored liquids inside, that were not labeled as to their contents.
Recent events (2)
- — I (O) $3000
- — Z (S) $5683
1910.303 B02
- Issued
- Apr 16, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: A) In the maintenance shop break room, a microwave oven and a refrigerator were plugged into a 15 amp power strip B) In the maintenance shop, a standard 15 amp power strip was connected to a wheeled floor cleaner.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Snoqualmie Entertainment Authority DBA Snoqualmie Casino
View Snoqualmie Entertainment Authority DBA Snoqualmie Casino's full OSHA safety record →
More inspections in this industry (NAICS 713210)
More inspections in WA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343652137.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.