Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MIDWEST ELASTOMERS, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of MIDWEST ELASTOMERS, INC. in 700 INDUSTRIAL DRIVE, WAPAKONETA, OH 45895 (NAICS 325211). OSHA activity number 344333489.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Midwest Elastomers, INC. — free Get an email when a new federal OSHA severe-injury report for Midwest Elastomers, INC. is published. One employer, no account, unsubscribe in one click.
Site address
700 INDUSTRIAL DRIVE
City
WAPAKONETA
State
OH
ZIP
45895
Mailing
P.O. BOX 412, WAPAKONETA, OH 45895
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
325211
Employees
75
Ownership type
A

3 citations on file for this inspection.

1910.332 B01

Serious Gravity 10 1 instance 3 exposed
Issued
Oct 22, 2019
Abate by
Dec 9, 2019
Penalty
Initial $10,210 · Current $10,210
29 CFR 1910.332(b)(1): Employees were not trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertained to their respective job assignments:   A)     Midwest Elastomers, Inc., located at 700 Industrial Drive, Wapakoneta, OH 45895: On or about September 18, 2019, the employer did not ensure that employees were adequately trained in electrical safety-related work practices such as, but not limited to, the use of special precautionary techniques and personal protective equipment. Employees were exposed to electrical hazards of 277 volts while conducting activities such as, but not limited to, verifying voltage and replacing fluorescent light units with LED light units in the Human Resource Office.
Recent events (2)
  • — I (S) $10210
  • — Z (S) $10210

1910.333 A

Serious Gravity 10 1 instance 3 exposed
Issued
Oct 22, 2019
Abate by
Dec 9, 2019
Penalty
Initial $10,210 · Current $10,210
29 CFR 1910.333(a): Safety-related work practices were not employed to prevent electric shock or other injuries resulting from either direct or indirect electrical contacts, when work was performed near or on equipment or circuits which were or could be energized:   A)     Midwest Elastomers, Inc., located at 700 Industrial Drive, Wapakoneta, OH 45895: On or about September 18, 2019, the employer did not ensure that electrical safety-related work practices were utilized to protect employees from electrical hazards that could result in electrocution, electrical shock, and arc flash/blast. Employees did not de-energize the light units prior to conducted activities such as, but not limited to, verifying voltage and replacing fluorescent light units with LED light units in the Human Resource Office.
Recent events (2)
  • — I (S) $10210
  • — Z (S) $10210

1910.335 A01 I

Serious Gravity 10 1 instance 3 exposed
Issued
Oct 22, 2019
Abate by
Dec 9, 2019
Penalty
Initial $10,210 · Current $0 Reduced
29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not using electrical protective equipment that was appropriate for the specific parts of the body to be protected and for the work to be performed:   A)     Midwest Elastomers, Inc., located at 700 Industrial Drive, Wapakoneta, OH 45895: On or about September 18, 2019, the employer did not ensure that employees used proper electrical protective equipment for the face, head, hands, and body to prevent burns, electrocution, electrical shock, or other injuries when employees were performing maintenance operations on electrical equipment.  Employees were exposed to electrical hazards of 277 volts while conducting activities such as, but not limited to, verifying voltage and replacing fluorescent light units with LED light units in the Human Resource Office.
Recent events (2)
  • — I (S) $0
  • — Z (S) $10210

View Midwest Elastomers, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344333489.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.