Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MIDWEST ELASTOMERS, INC.

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of MIDWEST ELASTOMERS, INC. in 700 INDUSTRIAL DRIVE, WAPAKONETA, OH 45895 (NAICS 325211). OSHA activity number 344384706.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Midwest Elastomers, INC. — free Get an email when a new federal OSHA severe-injury report for Midwest Elastomers, INC. is published. One employer, no account, unsubscribe in one click.
Site address
700 INDUSTRIAL DRIVE
City
WAPAKONETA
State
OH
ZIP
45895
Mailing
P.O. BOX 412, WAPAKONETA, OH 45895
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
325211
Employees
75
Ownership type
A

3 citations on file for this inspection.

1910.9 B

Serious Gravity 10 2 instances 8 exposed
Issued
Mar 18, 2020
Abate by
Apr 1, 2022
Penalty
Initial $10,390 · Current $6,234 Reduced

Hazardous substances M102

29 CFR 1910.9(b) Training. Standards in this part requiring training on hazards and related matters, such as standards requiring that employees receive training or that the employer train employees, provide training to employees, or institute or implement a training program, impose a separate compliance duty with respect to each employee covered by the requirement.   On October 18, 2019, the employer failed to fully train employees with regard to assuring that combustible dust hazards were fully minimized with deflagration protection, explosion protection, and dust collection equipment.
Recent events (3)
  • — F (S) $6234
  • — C (S) $10390
  • — Z (S) $10390

1910.22 A01

Other-than-serious Gravity 5 1 instance 75 exposed
Issued
Mar 18, 2020
Penalty
Initial $7,422 · Current $4,453 Reduced

Hazardous substances M102

29 CFR 1910.22(a)(1): (1) All places of employment, passageways, storerooms, service rooms, and walking-working surfaces were not kept in a clean, orderly, and sanitary condition.  a. Midwest Elastomers, Inc. located in Wapakoneta, Ohio:  On or about October 18, 2019, the employer did not ensure horizontal surfaces in Building #1 were kept free of combustible dust deposits. The combustible dust deposits are considered explosive based on testing data from the company and bulk samples analyzed by OSHA.
Recent events (3)
  • — F (O) $4453.2
  • — C (S) $7422
  • — Z (S) $7422

1910.307 C

Deleted Serious Gravity 5 3 instances 75 exposed
Issued
Mar 18, 2020
Abate by
Apr 3, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.307(c): Equipment, wiring methods, and installations of equipment in hazardous (classified) locations were not intrinsically safe, approved for the hazardous (classified) location, or safe for the hazardous (classified) location.   a. Midwest Elastomers, Inc. located in Wapakoneta, Ohio:  On or about October 18, 2019, the employer did not ensure electrical equipment located outside of the main office entrance near the Y Process line, were approved for a hazardous Class II location.  The equipment consisted of ventilated transformers and panelboards which were not dust tight and not rated NEMA type 9 enclosures.  b. Midwest Elastomers, Inc. located in Wapakoneta, Ohio:  On or about October 18, 2019, the employer did not ensure the Y process control panel located adjacent to the Y process dust collector, was approved for a hazardous Class II location.  The control panel was not dust tight and not rated as a NEMA type 9 enclosure.  c. Midwest Elastomers, Inc. located in Wapakoneta, Ohio:  On or about October 18, 2019, the employer did not ensure the control cabinet for the vacuum system located adjacent to the 9801 process, was approved for a hazardous Class II location.  The enclosure was not dust tight and not rated as a NEMA type 9 enclosure
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

View Midwest Elastomers, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344384706.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.