CHICAGO, IL —
OSHA Inspection: NORTH SOUTH MASONRY & TUCKPOINTING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NORTH SOUTH MASONRY & TUCKPOINTING, INC. in 2732 N KIMBALL AVE, CHICAGO, IL 60647 (NAICS 238140). OSHA activity number 344462122.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NORTH SOUTH MASONRY & TUCKPOINTING, INC.
- Site address
- 2732 N KIMBALL AVE
- City
- CHICAGO
- State
- IL
- ZIP
- 60647
- Mailing
- 1100 S. ALDINE AVE., PARK RIDGE, IL 60068
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.451 B01
- Issued
- Nov 22, 2019
- Penalty
- Initial $3,978 · Current $1,591 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels was not fully planked or decked between front uprights and the guardrail supports: a) On November 20, 2019, employees working from frame scaffolding were exposed to fall hazards of approximately 20.6 feet where the scaffold platform was not fully decked. b) On November 20, 2019, employees working from frame scaffolding were exposed to fall hazards of greater than 25 feet feet where the scaffold platform was not fully decked. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $1591.2
- — Z (S) $3978
1926.451 G01
- Issued
- Nov 22, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level: a) On November 20, 2019, employees working from frame scaffolding were exposed to fall hazards of approximately 20.6 feet. b) On November 20, 2019, employees working from frame scaffolding were exposed to fall hazards of greater than 25 feet. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 C01 III
- Issued
- Nov 22, 2019
- Penalty
- Initial $2,842 · Current $1,137 Reduced
General-duty citation text
29 CFR 1926.451(c)(1): Supported scaffold(s) with a height to base width (including outrigger supports) ratio greater than four to one (4:1) was not restrained from tipping by guying, tying, bracing, or equivalent means: a) On November 20, 2019, employees were exposed to fall hazards while working on frame scaffolding exceeding a 4:1 height to base width ratio which was not restrained from tipping by any means. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $1136.8
- — Z (S) $2842
1926.451 E01
- Issued
- Nov 22, 2019
- Penalty
- Initial $2,842 · Current $1,137 Reduced
General-duty citation text
29 CFR 1926.451(e)(1): Portable ladder, hook-on ladder, attachable ladder, stair tower, stairway-type ladder, ramp, runway, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface was not used to access scaffold platforms more than 2 feet above or below a point of access: a) On November 20, 2019, employees were exposed to a fall hazards while accessing and egressing the work platform of a frame scaffold. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $1136.8
- — Z (S) $2842
1926.404 F06
- Issued
- Nov 22, 2019
- Abate by
- Dec 5, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) On November 20, 2019, employees were using electrical power tools which were plugged into extension cords which were missing the ground pins. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at North South Masonry & Tuckpointing, INC.
View North South Masonry & Tuckpointing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344462122.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.