Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MOORE INDUSTRIES, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MOORE INDUSTRIES, INC. in 1317 HENRICKS DR., MONTPELIER, OH 43543 (NAICS 326199). OSHA activity number 344610365.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Moore Industries, INC. — free Get an email when a new federal OSHA severe-injury report for Moore Industries, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1317 HENRICKS DR.
City
MONTPELIER
State
OH
ZIP
43543
Mailing
P.O. BOX 316, MONTPELIER, OH 43543
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326199
Employees
90
Ownership type
A

4 citations on file for this inspection.

1910.36 D01

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 27, 2020
Abate by
May 20, 2020
Penalty
Initial $4,588 · Current $2,294 Reduced
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge:    On or about February 5, 2020, in the warehouse, the employer did not ensure that employees could exit the door on the west side of the building without keys, tools, or special knowledge in that employees would need to remove a ratchet strap from the door handle to open the door in order to exit the space.
Recent events (2)
  • — I (S) $2294
  • — Z (S) $4588

1910.37 A03

Serious Gravity 5 1 instance 5 exposed
Issued
Apr 27, 2020
Penalty
Initial $4,588 · Current $0 Reduced
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:    On or about February 5, 2020, in the northwest corner of the building, the employer did not ensure the exit route was free from obstructions in that the route was obstructed by materials such as but not limited to cardboard boxes and a fan.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4588

1910.1200 F06 I

Serious Gravity 1 1 instance 3 exposed
Issued
Apr 27, 2020
Penalty
Initial $3,441 · Current $1,720 Reduced

Hazardous substances 08101040106010802460

29 CFR 1910.1200(f)(6)(i): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the information required by 29 CFR 1910.1200(f)(1)(i) through 29 CFR 1910.1200(f)(1)(v):    On or about February 5, 2020, the employer did not ensure that containers storing hazardous chemicals such as, but not limited to cyclohexane, xylene, ethylbenzene, toluene, ethyl acetate, and ethyl alcohol which are included in 3M Adhesion Promoter 4298UV were labeled and marked with the product identifier, signal words, hazard statements, pictograms, precautionary statements and name, address and telephone number of the chemical manufacturer in that the only marking on the bottle identified it as Ad pro.
Recent events (2)
  • — I (S) $1720
  • — Z (S) $3441

1910.212 A01

Other-than-serious 1 instance 3 exposed
Issued
Apr 27, 2020
Abate by
May 20, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    On or about February 5, 2020, the employer did not ensure that employees were protected from injury while operating the Dake Johnson V-24 band saw to cut plastic parts and cardboard in that the guard did not fully cover the unused portion of the blade with approximately 2.5 inches of the blade exposed above the point of operation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Moore Industries, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344610365.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.