CINCINNATI, OH —
OSHA Inspection: W.G. STANG, LLC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of W.G. STANG, LLC in 7791 CHRISTINE AVE, CINCINNATI, OH 45241 (NAICS 237110). OSHA activity number 344770284.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- W.G. STANG, LLC
- Site address
- 7791 CHRISTINE AVE
- City
- CINCINNATI
- State
- OH
- ZIP
- 45241
- Mailing
- 2403 JACKSONBURG ROAD, HAMILTON, OH 45011
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 237110
- Employees
- 19
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.134 E01
- Issued
- Sep 1, 2020
- Abate by
- Oct 20, 2020
- Penalty
- Initial $2,313 · Current $0 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): General. The employer shall provide a medical evaluation to determine the employee's ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace. The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator. a.) On or about May 26th, 2020, W.G. Stang, LLC did not provide a medical evaluation to determine the employee's ability to use a respirator when employees were required to wear a tight-fitting N95 or 3M half mask elastomeric respirator in the workplace.
Recent events (2)
- — I (S) $0
- — Z (S) $2313
1910.134 F02
- Issued
- Sep 1, 2020
- Abate by
- Oct 20, 2020
- Penalty
- Initial $2,313 · Current $0 Reduced
General-duty citation text
29 CFR 1910.134(f)(2): The employer shall ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter. a.) On or about May 26nd, 2020, W.G. Stang, LLC did not ensure employees using a tight-fitting N95 or 3M elastomeric half mask respirator were fit tested prior to initial use of the respirator.
Recent events (2)
- — I (S) $0
- — Z (S) $2313
1926.1153 C01
- Issued
- Sep 1, 2020
- Abate by
- Sep 28, 2020
- Penalty
- Initial $3,856 · Current $2,500 Reduced
9000
General-duty citation text
29 CFR 1926.1153(c)(1): Specified exposure control methods. For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section. 29 CFR 1926.1153(c)(1)(ii) a) On or about June 2, 2020 W.G. Stang, LLC, had not fully and properly implemented the engineering controls specified for using a STIHL TS 420 handheld power saw, in that, the employer had not ensured employees were using a continuous watering system when cutting residential concrete driveways containing respirable crystalline silica.
Recent events (2)
- — I (S) $2500
- — Z (S) $3856
1910.1200 E01 I
- Issued
- Sep 1, 2020
- Abate by
- Sep 28, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1)(i): A list of the hazardous chemicals known to be present using a product identifier that is referenced on the appropriate safety data sheet (the list may be compiled for the workplace as a whole or for individual work areas); and, a.) On or about June 2nd, 2020, W.G. Stang, LLC's written Hazard Communication Program did not include a list of the hazardous chemicals known to be present at the workplace when employees were cutting concrete driveways containing 20% crystalline silica.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.1153 G01
- Issued
- Sep 1, 2020
- Abate by
- Sep 28, 2020
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1926.1153(g)(1): Written exposure control plan. The employer shall establish and implement a written exposure control plan that contains at least the following elements: (i): A description of the tasks in the workplace that involve exposure to respirable crystalline silica; (ii): A description of the engineering controls, work practices, and respiratory protection used to limit employee exposure to respirable crystalline silica for each task; (iii): A description of the housekeeping measures used to limit employee exposure to respirable crystalline silica; and (iv): A description of the procedures used to restrict access to work areas, when necessary, to minimize the number of employees exposed to respirable crystalline silica and their level of exposure, including exposures generated by other employers or sole proprietors. a.) On or about June 2nd, 2020 W.G. Stang, LLC had not established and implemented a written exposure control plan for employees exposed to respirable crystalline silica while cutting residential concrete driveways.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at W.G. Stang, LLC
View W.G. Stang, LLC's full OSHA safety record →
More inspections in this industry (NAICS 237110)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344770284.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.