OSHA Inspection: BRENT LAWRENZ

Issued

2021-04-28 00:00:00

Abate by

2021-05-24 00:00:00

Penalty

Initial $3218.00 · Current $3218.00

General-duty citation text

29 CFR  1910.178(l):Operators were not trained in the safe operation of powered industrial trucks:  At the jobsite located at 5102 26th St Wichita KS, employees engaged in forklift operations were exposed to crushing and struck-by hazards. The forklift operator had not completed forklift training to include a classroom portion, and written test that met the requirements of OSHA standard 1910.178(l) powered industrial trucks, operator training.

Issued

2021-04-28 00:00:00

Abate by

2021-05-24 00:00:00

Penalty

Initial $2575.00 · Current $2575.00

General-duty citation text

29 CFR  1926.102(a)(1):29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles:  At jobsite located at 5102 26th St Wichita KS, employees engaged in residential framing activities using a DeWalt circular saw were exposed to struck-by hazards in that eye protection was not utilized.

Issued

2021-04-28 00:00:00

Abate by

2021-05-24 00:00:00

Penalty

Initial $2575.00 · Current $2575.00

General-duty citation text

29 CFR  1926.451(c)(2)(v):The employer used forklifts  to support scaffold platforms without ensuring that the entire platform was attached to the fork and that the forklift was not moved horizontally while the platform was occupied:  At jobsite located at 5102 26th St Wichita KS, employees engaged in residential framing activities were exposed fall hazards and crushing hazards in that the scaffold platform was not attached to the forks or forklift.

Issued

2021-04-28 00:00:00

Abate by

2021-05-24 00:00:00

Penalty

Initial $4505.00 · Current $4505.00

General-duty citation text

29 CFR  1926.1053(b)(1):Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  At the jobsite located at 5102 26th St Wichita KS, employees engaged in residential framing activities were exposed to falls from approximately 8 feet, in that the A frame ladder used to access the upper working surface did not extend 3 feet or was secured to the structure.

Issued

2021-04-28 00:00:00

Abate by

2021-05-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1926.1053(b)(4):Ladder(s) were used for purposes other than the purpose for which they were designed:  At the jobsite located at 5102 26th St Wichita KS, employees engaged in residential framing activities using a Werner 10 foot A-frame ladder, were exposed to fall hazards of approximately 10 feet in that the ladder was not used for the purpose that it was designed.  An employee was working from the ladder while it was leaned against the structure.

Issued

2021-04-28 00:00:00

Abate by

2021-05-24 00:00:00

Penalty

Initial $30037.00 · Current $30037.00

General-duty citation text

29 CFR  1926.501(b)(13):Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):  At jobsite located at 5102 26th St Wichita KS, employees engaged in residential framing activities were exposed to fall hazards of approximately 22.5 feet from the roof to the ground in that fall protection was not utilized.

Issued

2021-04-28 00:00:00

Abate by

2021-05-24 00:00:00

Penalty

Initial $361.00 · Current $361.00

General-duty citation text

29 CFR  1910.178(a)(4):Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:  At jobsite located at 5102 26th St Wichita KS, the employer did not ensure that appropriate permission from the manufacturer was obtained by the user prior to using an attachment on the Skytrack Telehandler, and did not ensure that markings for the capacity, operation and maintenance were changed accordingly.