RAVENNA, OH —
OSHA Inspection: SPECTRUM MACHINE INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of SPECTRUM MACHINE INC. in 7071 PECK ROAD, RAVENNA, OH 44266 (NAICS 331410). OSHA activity number 345120273.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SPECTRUM MACHINE INC.
- Site address
- 7071 PECK ROAD
- City
- RAVENNA
- State
- OH
- ZIP
- 44266
- Mailing
- 7071 PECK ROAD, RAVENNA, OH 44266
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331410
- Employees
- 18
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.28 B03 I
- Issued
- Mar 25, 2021
- Abate by
- Apr 14, 2021
- Penalty
- Initial $6,827 · Current $4,096 Reduced
General-duty citation text
29 CFR 1910.28(b)(3)(i): The employer did not ensure that each employee is protected from falling through any hole (including skylights) that is 4 feet (1.2 m) or more above a lower level by one or more of the following methods listed in 29 CFR 1910.28(b)(3)(i)(A)-(D): On or about January 28, 2021, employees were exposed to a fall of approximately 12 feet into a pits below the furnace and casting area.
Recent events (2)
- — I (S) $4096
- — Z (S) $6827
1910.146 C02
- Issued
- Mar 25, 2021
- Abate by
- Apr 14, 2021
- Penalty
- Initial $6,827 · Current $4,096 Reduced
General-duty citation text
29 CFR 1910.146(c)(2):The employer did not inform exposed employees, by posting danger signs or by any other equally effective means, of the existence and location of and the danger posed by the permit spaces: On or about January 28, 2021, the employer did not ensure that signage or an equivalent means of labeling was present indicating the existence and location of, along with the danger posed by permit spaces located in the pits below the furnaces.
Recent events (2)
- — I (S) $4096
- — Z (S) $6827
1910.146 C04
- Issued
- Mar 25, 2021
- Abate by
- Apr 14, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(c)(4):When the employer decided that its employees would enter permit spaces, the employer did not develop and implement a written permit space entry program that complied with 29 CFR 1910.146: On or about January 28, 2021, where employees are required to enter the pits beneath the casting area to clean debris, the employer had not developed and implemented a written permit space program.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.146 C05 II C
- Issued
- Mar 25, 2021
- Abate by
- Apr 14, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(c)(5)(ii)(C):Employees entered into permit spaces that met the conditions set forth in 29 CFR 1910.146(c)(5)(i) but before an employee entered the space, the internal atmosphere was not tested with a calibrated direct-reading instrument: On or about January 28, 2021, the employed required employees to enter the pits below the furnace and casting area to clean debris without first testing the atmosphere inside for oxygen content, flammable gases or vapors, and toxic air contaminants.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.146 G04
- Issued
- Mar 25, 2021
- Abate by
- Apr 14, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(g)(4):The employer did not certify that the training required by 29 CFR 1910.146(g)(1) through 29 CFR 1910.146(g)(3) had been accomplished: On or about January 28, 2021, the employer had not provided confined space training to employees required to enter pits below the furnace and casting area to clean debris.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Spectrum Machine INC.
View Spectrum Machine INC.'s full OSHA safety record →
More inspections in this industry (NAICS 331410)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345120273.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.