SOUTH WINDSOR, CT —
OSHA Inspection: SLP CONTRACTORS, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SLP CONTRACTORS, LLC in 247 DEMING STREET, SOUTH WINDSOR, CT 06074 (NAICS 238130). OSHA activity number 345250625.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SLP CONTRACTORS, LLC
- Site address
- 247 DEMING STREET
- City
- SOUTH WINDSOR
- State
- CT
- ZIP
- 06074
- Mailing
- 821 QUAKER LANE SOUTH, WEST HARTFORD, CT 06110
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 8
- Ownership type
- A
Citations
5 citations on file for this inspection.
1903.19 C01
- Issued
- Dec 16, 2021
- Abate by
- Jan 6, 2022
- Penalty
- Initial $361 · Current $361
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that each of the cited violations had been abated: 247 Deming Street, South Windsor, CT 06074: On or about December 6, 2021, certification of abatement was not provided to OSHA for violations cited on September 14, 2021. Final order date was October 13, 2021 and abatement was due on November 1, 2021.
Recent events (1)
- — Z (O) $361
1926.602 C01 I
- Issued
- Sep 14, 2021
- Abate by
- Nov 1, 2021
- Penalty
- Initial $4,505 · Current $4,505
General-duty citation text
29 CFR 1926.602(c)(1)(i):Lifting and hauling equipment did not have the rated capacity clearly posted on the vehicle so as to be clearly visible to the operator: On or about April 7, 2021 the foreman was operating a rough terrain fork truck and no load chart or any data plate with rated capacity was on the machine or on site.
Recent events (1)
- — Z (S) $4505
1926.602 C01 II
- Issued
- Sep 14, 2021
- Abate by
- Nov 1, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.602(c)(1)(ii): Modifications or additions affecting the safe operation of the equipment were made without the manufacturer's written approval: Note: If such modifications or changes were made, the capacity, operation, and maintenance instruction plates, tags, or decals should have been changed accordingly. On or about April 7, 2021 the foreman was operating a rough terrain fork truck and was using a jib attached to the forks and no manufacturer's written approval was acquired.
Recent events (1)
- — Z (S) $0
1926.602 C01 VI
- Issued
- Sep 14, 2021
- Abate by
- Nov 1, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.602(c)(1)(vi):Industrial truck(s) in use did not meet the applicable requirements of design, construction, stability, inspection, testing, maintenance, and operation, as defined in American National Standards Institute B56.1-1969, Safety Standards for Powered Industrial Trucks. On or about April 7, 2021 the employer did not meet or follow the ANSI requirements for the rough terrain fork truck in use. Stability, operation, and maintenance requirements were not followed.
Recent events (1)
- — Z (S) $0
1910.178 L01 I
- Issued
- Sep 14, 2021
- Abate by
- Nov 1, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l) as referenced by the note contained in 1926.602(d). On or about April 7, 2021 the employer did not ensure, evaluate, and certify that the foreman operating the Highlifter Lull rough terrain fork truck was competent to operate the fork truck safely.
Recent events (1)
- — Z (S) $0
More inspections at SLP Contractors, LLC
View SLP Contractors, LLC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345250625.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.