WAVERLY, OH —
OSHA Inspection: SPEYSIDE BOURBON STAVE MILL IN OHIO AT WAVERLY, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SPEYSIDE BOURBON STAVE MILL IN OHIO AT WAVERLY, INC. in 306 W. NORTH ST., WAVERLY, OH 45690 (NAICS 321113). OSHA activity number 345556120.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SPEYSIDE BOURBON STAVE MILL IN OHIO AT WAVERLY, INC.
- Site address
- 306 W. NORTH ST.
- City
- WAVERLY
- State
- OH
- ZIP
- 45690
- Mailing
- 306 W. NORTH ST., WAVERLY, OH 45690
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 29
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.147 D
- Issued
- Oct 25, 2021
- Abate by
- Dec 13, 2021
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d):Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: (1) authorized employee shall have knowledge of the type and magnitude of the energy, the hazards of the energy to be controlled, and the method or means to control the energy. (2) turn off and shut down the machine (3) physically locate and operate the energy isolating devices in such a manner as to isolate the machine or equipment from the energy sources. (4) affix lockout or tagout devices to each energy isolating device (5) Prior to starting work on machines that have been locked out or tagged out, verify that isolation and deenergizing of the machine or equipment have been accomplished. On 9/21/21 the employer did not ensure that employee(s) working on or near a chain and sprocket for the conveyer system leading from the Re-work saw were locking out the 480 volts that powered the chain and sprocket out prior to clearing a jam on the conveyer belt system.
Recent events (2)
- — I (S) $0
- — Z (S) $13653
1910.219 F03
- Issued
- Oct 25, 2021
- Penalty
- Initial $13,653 · Current $10,000 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprockets and chains. All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets. On 9/21/21 the employer did not ensure that the chain and sprocket for the conveyer system leading from the re-saw (model # D TRMSAW PANELL) that was at ground level, was properly guarded in that employees were exposed to a moving chain and sprocket while clearing a jam.
Recent events (2)
- — I (S) $10000
- — Z (S) $13653
More inspections at Speyside Bourbon Stave Mill in Ohio at Waverly, INC.
View Speyside Bourbon Stave Mill in Ohio at Waverly, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345556120.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.