DENVER, CO —
OSHA Inspection: PROTECTO WRAP COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PROTECTO WRAP COMPANY in 2255 SOUTH DELAWARE STREET, DENVER, CO 80223 (NAICS 324122). OSHA activity number 345843213.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PROTECTO WRAP COMPANY
- Site address
- 2255 SOUTH DELAWARE STREET
- City
- DENVER
- State
- CO
- ZIP
- 80223
- Mailing
- 1955 SOUTH CHEROKEE STREET, DENVER, CO 80223
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 324122
- Employees
- 40
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Aug 12, 2022
- Abate by
- Sep 1, 2022
- Penalty
- Initial $7,252 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On and before March 18, 2022, the employer did not provide one or more methods of machine guarding to protect the operator from hazards created by the point of operation on a Trans Western Machine Company lathe, located in the maintenance department. This condition exposed employees to injuries including, but not limited to, contusions, lacerations, and amputation. (b) On and before March 18, 2022, the employer did not provide one or more methods of machine guarding to protect the operator from hazards created by the point of operation on a Buffalo No 22 drill press, Serial Number 54-9709, located in the maintenance department. This condition exposed employees to injuries including, but not limited to, contusions, lacerations, and amputation.
Recent events (2)
- — I (S) $4000
- — Z (S) $7252
1910.243 C03
- Issued
- Aug 12, 2022
- Abate by
- Sep 1, 2022
- Penalty
- Initial $5,801 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.243(c)(3):Abrasive wheels used on vertical portable grinder(s) (right angle head grinders) were not provided with safety guard(s) having a maximum exposure angle of 180 degrees and located between the operator and wheel: (a) On and before March 18, 2022, the employer did not provide safety guards having a maximum angle of 180 degrees and located between the operator and wheel of a portable grinder with a 3M CUBITRON II Cut-off Wheel, product number: 66530. This condition exposed employees to injuries including, but not limited to, abrasions and lacerations.
Recent events (2)
- — I (S) $3000
- — Z (S) $5801
1910.303 B08 I
- Issued
- Aug 12, 2022
- Abate by
- Sep 1, 2022
- Penalty
- Initial $4,351 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.303(b)(8)(i): Electrical equipment was not firmly secured to the surface on which it was mounted: (a) On and before March 18, 2022, the employer did not ensure electrical equipment was firmly secured to the surface on which it was mounted, in that an 120 volt electrical outlet that provided power to charge tools and extension cords in the polybutene 32 tank room of the facility was unsecured on the shelf of a shelving unit. This condition exposed employees to electrical shock hazards.
Recent events (2)
- — I (S) $3000
- — Z (S) $4351
1910.1200 G01
- Issued
- Aug 12, 2022
- Abate by
- Sep 1, 2022
- Penalty
- Initial $4,351 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use: (a) On and before March 18, 2022, the employer did not provide safety data sheets, or had material safety data sheets for the following chemicals: - DOW CORNING(R) 236 DISPERSION - Shellzone Universal antifreeze and coolant
Recent events (2)
- — I (S) $0
- — Z (S) $4351
1910.1200 H01
- Issued
- Aug 12, 2022
- Abate by
- Sep 1, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (a) On and before March 18, 2022, the employer did not ensure that all employees were provided effective information and training on hazardous chemicals in their workplace. This condition exposed employees to health and safety hazards associated with chemical use and exposure.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Protecto Wrap Company
View Protecto Wrap Company's full OSHA safety record →
More inspections in this industry (NAICS 324122)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345843213.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.