BARRIGADA, GU —
OSHA Inspection: GIANT CONSTRUCTION CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GIANT CONSTRUCTION CORPORATION in INTERSECTION OF WEST SUNSET BLVD AND FOURTH STREET, BARRIGADA, GU 96913 (NAICS 237110). OSHA activity number 347458705.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GIANT CONSTRUCTION CORPORATION
- Site address
- INTERSECTION OF WEST SUNSET BLVD AND FOURTH STREET
- City
- BARRIGADA
- State
- GU
- ZIP
- 96913
- Mailing
- P.O. BOX 9578, TAMUNING, GU 96931
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 237110
- Employees
- 19
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.134 E01
- Issued
- Jul 23, 2024
- Penalty
- Initial $6,857 · Current $4,800 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: Employees that were required to wear an N95 respirator while grinding cement were not medically cleared for use. Employees were exposed to respiratory hazards.
Recent events (2)
- — I (S) $4799.9
- — Z (S) $6857
1926.303 B01
- Issued
- Jul 23, 2024
- Abate by
- Aug 9, 2024
- Penalty
- Initial $4,113 · Current $2,879 Reduced
General-duty citation text
29 CFR 1926.303(b)(1): Grinding machines were not equipped with safety guards in conformance with the requirements of ANSI B7.1-1970, Safety Code for the Use, Care, and Protection of abrasive wheels, and paragraph (d) of this section. Along the cement curb: A Skil angle grinder was used to smooth cement without a guard. Employees were exposed to laceration hazards.
Recent events (2)
- — I (S) $2879.1
- — Z (S) $4113
1926.1153 C01
- Issued
- Jul 23, 2024
- Abate by
- Aug 9, 2024
- Penalty
- Initial $6,857 · Current $4,800 Reduced
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section. Along the cement curb: An employee used a Skil grinder to smooth concrete without any control measures implemented from Table 1-Specified Exposure Control Methods When Working with Materials Containing Crystalline Silica. Employees were exposed to respiratory hazards.
Recent events (2)
- — I (S) $4799.9
- — Z (S) $6857
1910.134 G01 I A
- Issued
- Jul 23, 2024
- Abate by
- Aug 9, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function: Employees required to wear a half-face respirator while conducting grinding activities had facial hair that did not allow the respirator to seal. Employees were exposed to respiratory hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.251 E08 III
- Issued
- Jul 23, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.251(e)(8)(iii): Synthetic web slings with snags, punctures, tears or cuts were not immediately removed from service: Middle of the jobsite: Employees used damaged synthetic web slings to transport curb forms. Employees were exposed to struck-by and crush-by hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Giant Construction Corporation
View Giant Construction Corporation's full OSHA safety record →
More inspections in this industry (NAICS 237110)
More inspections in GU
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347458705.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.