LAKE IN THE HILLS, IL —
OSHA Inspection: AFC EMPLOYMENT SOLUTIONS LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of AFC EMPLOYMENT SOLUTIONS LLC in 14 WALTER COURT, LAKE IN THE HILLS, IL 60156 (NAICS 333244). OSHA activity number 347550097.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AFC EMPLOYMENT SOLUTIONS LLC
- Site address
- 14 WALTER COURT
- City
- LAKE IN THE HILLS
- State
- IL
- ZIP
- 60156
- Mailing
- 14 WALTER COURT, LAKE IN THE HILLS, IL 60156
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333244
- Employees
- 165
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.28 B01 I
- Issued
- Sep 27, 2024
- Abate by
- Oct 25, 2024
- Penalty
- Initial $10,372 · Current $6,000 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the systems described in 29 CFR 1910.28(b)(1)(i): On or about June 10, 2024, and at times prior thereto, workers on the cat walk on Printer# 20 did not utilize a means of fall protection at the ladder opening, thereby exposing employees to fall hazards. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
- — I (S) $6000
- — Z (S) $10372
1910.29 B02 I
- Issued
- Sep 27, 2024
- Abate by
- Oct 25, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.29(b)(2)(i): The employer did not ensure that guardrails met the requirement that mid-rails that are installed at a height midway between the top edge of the guardrail system and the walking-working surface. On or about July 2, 2024, the employer did not ensure that employees working on the catwalk had mid-rails between the top edge of the guardrail system and the walking-working surface, thereby exposing employees to fall hazards. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.29 B13 I
- Issued
- Sep 27, 2024
- Abate by
- Oct 25, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
1910.29(b)(13)(i): A guardrail opening did not have a self-closing gate that slides or swings away from the hole, and is equipped with a top rail and mid-rail or equivalent intermediate member that meets the requirements in paragraph (b) of this section; On or about July 2, 2024, the employer did not ensure that the employees working on the catwalk of Printer#20 were protected from falls due to failure to install a self-closing gate. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Sep 27, 2024
- Abate by
- Nov 15, 2024
- Penalty
- Initial $14,518 · Current $10,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about May 17, 2024, the employer did not ensure that the guard was in place to protect the operator(s) working on printing press 20 from amputation hazards at ingoing nip points between the rollers. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
- — I (S) $10000
- — Z (S) $14518
More inspections at AFC Employment Solutions LLC
View AFC Employment Solutions LLC's full OSHA safety record →
More inspections in this industry (NAICS 333244)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347550097.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.