CINCINNATI, OH —
OSHA Inspection: CONSOLIDATED METAL PRODUCTS, INC.
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of CONSOLIDATED METAL PRODUCTS, INC. in 1028 DEPOT STREET, CINCINNATI, OH 45204 (NAICS 332999). OSHA activity number 347844318.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONSOLIDATED METAL PRODUCTS, INC.
- Site address
- 1028 DEPOT STREET
- City
- CINCINNATI
- State
- OH
- ZIP
- 45204
- Mailing
- 1028 DEPOT STREET, CINCINNATI, OH 45204
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 186
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.22 B
- Issued
- Feb 18, 2025
- Penalty
- Initial $16,385 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(b): Loads. The employer must ensure that each walking-working surface can support the maximum intended load for that surface. a) On 10/21/2024, the employer did not ensure that the newly dug out excavation that met up with the existing blacktop driveway showing fissures at the shipping and receiving for Plant 6 could support the weight of the forklifts including the Linde forklift (model #H20T) weighing 7500 pounds. Employees operating forklifts in and around the excavation on 10/21, 10/25, 10/26, were exposed to tip over hazards from the drop off of the 10" to 14" change in elevation from the excavation and the edge of the walking working surface. On 10/28/2024, the Linde forklift tipped over and landed in the excavation site crushing the employee.
Recent events (2)
- — I (S) $0
- — Z (S) $16385
1910.22 D01
- Issued
- Feb 18, 2025
- Penalty
- Initial $16,385 · Current $10,000 Reduced
General-duty citation text
29 CFR 1910.22(d)(1): (1) Walking-working surfaces are inspected, regularly and as necessary, and maintained in a safe condition; a) On and after 10/21/2024, the employer did not ensure that the walking-working surfaces near plant 6 were being regularly inspected, and being maintained in a safe condition to ensure that the fissures located on the black top did not impose a hazard where the excavation created a 10 to 14" drop off between the excavation and the end of the blacktop driveway where forklift trucks were being operated.
Recent events (2)
- — I (S) $10000
- — Z (S) $16385
1910.145 C03
- Issued
- Feb 18, 2025
- Penalty
- Initial $16,385 · Current $8,193 Reduced
General-duty citation text
29 CFR 1910.145(c)(3): Safety instruction signs. Safety instruction signs shall be used where there is a need for general instructions and suggestions relative to safety measures. a) On 10/21/2024, the employer did not ensure that safety instructions signs were used for general instructions to employees who operated forklifts near and around the construction area including where the 10 to 14" excavation was dug and created a hazard for employees who operated forklifts being exposed to a potential tip over hazard created by the drop off.
Recent events (2)
- — I (O) $8192.5
- — Z (S) $16385
1910.178 L03 II I
- Issued
- Feb 18, 2025
- Penalty
- Initial $16,385 · Current $10,000 Reduced
General-duty citation text
29 CFR 1910.178(l)(3)(ii)(I): Other unique or potentially hazardous environmental conditions in the workplace that could affect safe operation. a) On or before 10/21/2024, the employer did not ensure that employees were trained on the unique hazard created when an excavation was dug between plant 4 and plant 6 that created a 10"-14" drop off between the excavation and the edge of the blacktop. Employees were not trained on ensuring that they were wearing their seatbelts due to the change in elevation between the excavation site and the walk-working surface of the blacktop, nor were employees trained on the potential hazard of driving the forklifts off the elevation and being exposed to a crushing hazard if the forklift landed on the employees. On 10/28/2024, an employee was crushed when the forklift tipped over into the excavation from the walk-working surface.
Recent events (2)
- — I (S) $10000
- — Z (S) $16385
1910.178 L04 III
- Issued
- Feb 18, 2025
- Abate by
- Mar 21, 2025
- Penalty
- Initial $16,385 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(4):Refresher training and evaluation. (iii): An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years. a) On or before 10/28/2024, the employer did not re-certify forklift operators' performance within the last three years. b) On or before 10/28/2024, the employer did not conduct refresher training for forklift operators to wear seatbelts while employees were utilizing forklifts such as a Linde forklift (model #H20T) to move products, totes and dumpsters throughout the facility and around the construction site
Recent events (2)
- — I (S) $0
- — Z (S) $16385
More inspections at Consolidated Metal Products, INC.
View Consolidated Metal Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347844318.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.