WALBRIDGE, OH —
OSHA Inspection: MSC WALBRIDGE COATINGS INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MSC WALBRIDGE COATINGS INC. in 30610 EAST BROADWAY, WALBRIDGE, OH 43465 (NAICS 332813). OSHA activity number 348021791.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MSC WALBRIDGE COATINGS INC.
- Site address
- 30610 EAST BROADWAY
- City
- WALBRIDGE
- State
- OH
- ZIP
- 43465
- Mailing
- 30610 EAST BROADWAY, WALBRIDGE, OH 43465
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332813
- Employees
- 80
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.22 A02
- Issued
- May 30, 2025
- Abate by
- Jun 6, 2025
- Penalty
- Initial $14,045 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(a)(2): The employer did not ensure that the floor of each workroom is maintained in a clean and, to the extent feasible, in a dry condition. The employer did not ensure that when wet processes are used, drainage is be maintained and, to the extent feasible, dry standing places, such as false floors, platforms, and mats are provided. a) MSC Walbridge Coating, Inc. on or about January February 4, 2025, the location of 30610 East Broadway, Walbridge OH 43465: The employer did not ensure finish coating room was maintained in an orderly condition to mitigate tripping hazards. Due to this condition, employees tasked with cleaning Line 6 finish coating rollers from an elevated concrete platform covered in paint and water were exposed to a slip/trip/fall hazard.
Recent events (2)
- — I (O) $0
- — Z (S) $14045
1910.147 C07 I
- Issued
- May 30, 2025
- Abate by
- Sep 2, 2025
- Penalty
- Initial $16,385 · Current $9,831 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i):The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: a) MSC Walbridge Coating, Inc. on or about January February 4, 2025, the location of 30610 East Broadway, Walbridge OH 43465: On or about January 31, 2025, the employer did not ensure the employees were trained to understand the purpose and function of energy control. Employees tasked with cleaning the finishing coater on Line 6 in an energized condition were exposed to caught in hazards created by in running nip point between the pick up roll and applicator roll.
Recent events (2)
- — I (S) $9831
- — Z (S) $16385
1910.147 D
- Issued
- May 30, 2025
- Abate by
- Sep 2, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d):The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6). a) MSC Walbridge Coating, Inc. on or about January February 4, 2025, the location of 30610 East Broadway, Walbridge OH 43465: The employer did not ensure employees tasked with performing lock out covered tasks followed established procedures in sequence to ensure equipment was effectively deenergized. Due to this condition, employees tasked with cleaning the finishing coater on Line 6 were exposed to caught in hazards created by the in running nip point between the pick up roll and applicator roll.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- May 30, 2025
- Abate by
- Jun 6, 2025
- Penalty
- Initial $11,705 · Current $7,023 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. a) MSC Walbridge Coating, Inc. on or about February 4, 2025, the location of 30610 East Broadway, Walbridge OH 43465: The employer did not ensure an effective form of guarding was provided to employees when working on and around Line 6 Finishing Coater. Due to this condition, employees tasked with monitoring roll coat operations in this area were exposed to caught in hazards created by in running nip point between the pick up roll and applicator roll.
Recent events (2)
- — I (S) $7023
- — Z (S) $11705
More inspections at MSC Walbridge Coatings INC.
View MSC Walbridge Coatings INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332813)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348021791.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.