St. Paul, MN ·
OSHA Injury Report: Baldinger Bakery St. Paul, MN
Injury · Other recordable case
At a glance
On , an injury at Baldinger Bakery St. Paul, MN in 1256 Phalen Blvd, St. Paul, MN 55106 resulted in other recordable case. Employee was technician in rolls and buns (including frozen) made in commercial bakeries.
Where did this happen?
- Establishment
- Baldinger Bakery St. Paul, MN
- Parent company
- C.H. Guenther & Son LLC
- Street
- 1256 Phalen Blvd
- City
- St. Paul
- State
- MN
- ZIP
- 55106
- On-site location
- Line 2 Q-Bake
What was the outcome?
- Outcome
- Other recordable case (code 4)
- Type
- Injury (code 1)
Before the incident
A maintenance technician midway through their shift was working on a down day (no product being produced) to replace the sprockets on a the line 2 pre-pack metal detector conveyor belt at the infeed end of the conveyor. They had removed the bearing and housing from the control panel side of the shaft and were working to remove the bearing and housing from the non-control panel side. As they removed the housing they lost control of the shaft and it struck their left index finger. This finger was positioned in the small space between the shaft and the conveyor framework (this space is usually occupied by the bearing and its housing) the finger was then caught between the shaft and the framework. The incident resulted in a laceration along top of their left index finger near the edge of the nail between the cuticle and the foremost knuckle of their finger. Another maintenance technician was also working on the line 2 pre-pack metal detector near the outfeed end at the time of this inciden
What happened
A maintenance technician midway through their shift was working on a down day (no product being produced) to replace the sprockets on a the line 2 pre-pack metal detector conveyor belt at the infeed end of the conveyor. They had removed the bearing and housing from the control panel side of the shaft and were working to remove the bearing and housing from the non-control panel side. As they removed the housing they lost control of the shaft and it struck their left index finger. This finger was positioned in the small space between the shaft and the conveyor framework (this space is usually occupied by the bearing and its housing) the finger was then caught between the shaft and the framework. The incident resulted in a laceration along top of their left index finger near the edge of the nail between the cuticle and the foremost knuckle of their finger. Another maintenance technician was also working on the line 2 pre-pack metal detector near the outfeed end at the time of this inciden
Injury or illness
Laceration Cut Open Wound Hand Left Index Finger
Object or substance involved
Product Conveyor Roller
Summary line
Hand caught between conveyor roller and housing causing laceration.
Employee and industry
- Job description
- Technician
- SOC code
- 51-3092: Food Batchmakers
- NAICS code
- 311812: Rolls and buns (including frozen) made in commercial bakeries
- NAICS vintage
- 2022
- Employees at this establishment (2023 average)
- 165
- Hours worked at this establishment (2023 total)
- 387,624
- EIN
- 741508677
- Establishment ID
- 943214
- Employer case #
- 80
When (timing detail)
- Date of incident
- Shift started
- 08:00
- Time of incident
- 13:00
- Filing year
- 2023
- Submitted to OSHA
- 2024-02-09
More injuries at Baldinger Bakery St. Paul, MN
View Baldinger Bakery St. Paul, MN's full OSHA safety record →
More injuries in this industry (NAICS 311812)
More injuries in MN
Source
Data from OSHA ITA Form 300/301 electronic submissions, filing year 2023. ITA Case Detail records are establishment-reported submissions, not OSHA inspections, so no per-record IMIS deep link exists.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.