YIGO, GU —
OSHA Inspection: XIANG WANG CONSTRUCTION CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of XIANG WANG CONSTRUCTION CORPORATION in CHALAN CHIBA LOT R91, YIGO, GU 96929 (NAICS 236115). OSHA activity number 335325106.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- XIANG WANG CONSTRUCTION CORPORATION
- Site address
- CHALAN CHIBA LOT R91
- City
- YIGO
- State
- GU
- ZIP
- 96929
- Mailing
- PO BOX 315752, TAMUNING, GU 96931
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236115
- Employees
- 2
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.25 A
- Issued
- Jan 16, 2013
- Abate by
- Feb 12, 2013
- Penalty
- Initial $1,200 · Current $1,200
General-duty citation text
29 CFR 1926.25(a): During the course of construction, alteration, or repairs, form or scrap lumber with protruding nails was not kept clear from work areas: (a) Construction Site: On or about July 23, 2012, and at times prior thereto, employees were exposed to laceration and impalement hazards while walking and working around scrap wood with vertically protruding nails.
Recent events (1)
- — Z (S) $1200
1926.300 B01
- Issued
- Jan 16, 2013
- Abate by
- Feb 12, 2013
- Penalty
- Initial $1,200 · Current $1,200
General-duty citation text
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use: (a) Construction Site: On or about July 23, 2012, and at times prior thereto, employees were exposed to flying parts and pieces while using a Makita power operated angle grinder, serial number 08643464, without a guard.
Recent events (1)
- — Z (S) $1200
1926.404 B01 II
- Issued
- Jan 16, 2013
- Abate by
- Feb 12, 2013
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.404(b)(1)(ii): On a construction site, where an assured equipment grounding program was not utilized, all 120-volt, single-phase, 15 and 20 ampere receptacle outlets which were not a part of the permanent wiring of the building or structure and which are in use by employees did not have approved ground fault circuit interrupters for personal protection: (a) Construction Site: On or about July 23, 2012, and at times prior thereto, employees were exposed to electrical shock hazards while using the Makita power operated angle grinder that was plugged into an outlet without ground fault circuit interrupters.
Recent events (1)
- — Z (S) $2000
1926.404 F06
- Issued
- Jan 16, 2013
- Abate by
- Feb 12, 2013
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: (a) Construction Site: On or about July 23, 2012, and at times prior thereto, employees were exposed to electrical shock hazards while using an ungrounded extension cord for power tools.
Recent events (1)
- — Z (S) $2000
1926.405 G02 IV
- Issued
- Jan 16, 2013
- Abate by
- Feb 12, 2013
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: (a) Construction Site: On or about July 23, 2012, and at times prior thereto, employees were exposed to electrical shock hazards while using power cords without strain relief.
Recent events (1)
- — Z (S) $2000
More inspections at Xiang Wang Construction Corporation
View Xiang Wang Construction Corporation's full OSHA safety record →
More inspections in this industry (NAICS 236115)
More inspections in GU
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335325106.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.