MIDDLETOWN, OH —
OSHA Inspection: ADS MANUFACTURING OHIO LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ADS MANUFACTURING OHIO LLC in 1701 REINARTZ BLVD., MIDDLETOWN, OH 45042 (NAICS 332420). OSHA activity number 337511018.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ADS MANUFACTURING OHIO LLC
- Site address
- 1701 REINARTZ BLVD.
- City
- MIDDLETOWN
- State
- OH
- ZIP
- 45042
- Mailing
- 1701 REINARTZ BLVD., MIDDLETOWN, OH 45042
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332420
- Employees
- 24
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 L01 I
- Issued
- Nov 30, 2012
- Abate by
- Jan 4, 2013
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) Employees that were allowed and permitted to operate the powered industrial trucks were not adequately trained and evaluated by a competent person, as some operators had not received any formal instructions and could not read and/or interpret a capacity/load rating chart and other operators had not received any practical, hands-on demonstrations and evaluation of their performance in the workplace.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.178 P01
- Issued
- Nov 30, 2012
- Abate by
- Jan 4, 2013
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): (a) The horn doesn't work on Toyota forklift #4 (934998 on the side). (b) The horn doesn't work on Toyota forklift #3 (934981 on the side).
Recent events (2)
- — I (S) $0
- — Z (S) $2800
1910.253 B04 III
- Issued
- Nov 30, 2012
- Abate by
- Jan 4, 2013
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least: (a) In the Future Weld area, there were cylinders of acetylene (1) and propylene (1) standing next to an oxygen cylinder.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.253 B05 III B
- Issued
- Nov 30, 2012
- Abate by
- Jan 4, 2013
- Penalty
- Initial $3,500 · Current $0 Reduced
General-duty citation text
29 CFR 1910.253(b)(5)(iii)(B): Cylinders were not handled carefully which could result in damage to the cylinder, valve or safety devices and cause leakage: (a) In the Welding area, there were two (2) argon cylinders hooked up to Miller MIG welders that were not secured from being knocked over and damaging the valves. (b) In the Future weld area, at the aisleway, there were three cylinders, (a proplylene cylinder, an acetylene cylinder that was not capped, and an oxygen cylinder) that were not secured from being knocked over and damaged.
Recent events (2)
- — I (S) $0
- — Z (S) $3500
1910.178 A06
- Issued
- Nov 30, 2012
- Abate by
- Jan 4, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates or markings were not maintained in a legible condition: (a) On the toyota forklift #7 (934881 on the side), the capacity chart and serial number plate was not legible.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at ADS Manufacturing Ohio LLC
View ADS Manufacturing Ohio LLC's full OSHA safety record →
More inspections in this industry (NAICS 332420)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337511018.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.