Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,871Inspections Most recent open 2026-07-30 Last loaded 2026-08-03

OSHA Inspection: WVM CONSTRUCTION, INC.

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of WVM CONSTRUCTION, INC. in THE WAVES S LITTLE ROCK AVE, VENTNOR CITY, NJ 08406 (NAICS 238130). OSHA activity number 339662504.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch WVM Construction, INC. for free Get an email when a new federal OSHA severe-injury report for WVM Construction, INC. is published. One employer, no account, unsubscribe in one click.
Site address
THE WAVES S LITTLE ROCK AVE
City
VENTNOR CITY
State
NJ
ZIP
08406
Mailing
130 BALA DR., SOMERS POINT, NJ 08244
Inspection type
Unprogrammed Related (G)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
3
Ownership type
A

7 citations on file for this inspection.

1903.19 C01

Other-than-serious 3 instances 3 exposed
Issued
Jul 8, 2014
Abate by
Aug 1, 2014
Penalty
Initial $400 · Current $400
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated.  a) The employer failed to provide documentation and certification for abatement of citation 1 item 1 in which employee was observed working from the raised forks of a rough terrain fork lift (RTFL), installing sheathing with a pneumatic nail gun and hammer. An employee on the ground below was not wearing a hard hat and was thus exposed to an overhead struck-by hazard from potential falling tools and/or plywood sheathing. On or about 06/17/14.  b) The employer failed to provide documentation and certification for abatement of citation 1 item 2 in which the employees was not wearing eye protection when operating equipment. Observed on or about 06/17/14.  c) The employer failed to provide documentation and certification for abatement of citation 1 item 3 in which employees was observed cutting plywood sheathing with a Makita circular saw.  The saw's power cord was damaged and the conductors were exposed, thus exposing the employee to electrical shock hazards. Observed on or about 06/17/14.
Recent events (1)
  • · Z (O) $400

1903.19 D01

Other-than-serious 2 instances 3 exposed
Issued
Jul 8, 2014
Abate by
Aug 1, 2014
Penalty
Initial $400 · Current $400
29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.  a) The employer failed to provide documentation and certification for abatement of citation 1 item 4 in which employees was observed working from the raised forks of a rough terrain fork lift (RTFL), using an unsecured pallet as his walking working platform. Observed on or about 06/17/14.  b) The employer failed to provide documentation and certification for abatement of citation 1 item 5 in which employees was observed working from the raised forks of a rough terrain fork lift (RTFL), using an unsecured pallet as his walking working platform.  The employee was not using fall protection and was thus exposed to a fall hazard of approximately 16 feet. Observed on or about 06/17/14.
Recent events (1)
  • · Z (O) $400

1926.100 A

Serious Gravity 5 1 instance 1 exposed
Issued
May 21, 2014
Abate by
Jun 17, 2014
Penalty
Initial $2,400 · Current $2,400
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:   a) The Waves, South Little Rock Ave., Ventnor:  On or about 04/3/2014, a WVM Construction, Inc. employee was observed working from the raised forks of a rough terrain fork lift (RTFL), installing sheathing with a pneumatic nail gun and hammer. An employee on the ground below was not wearing a hard hat and was thus exposed to an overhead struck-by hazard from potential falling tools and/or plywood sheathing.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • · Z (S) $2400

1926.102 A01

Serious Gravity 5 2 instances 2 exposed
Issued
May 21, 2014
Abate by
Jun 17, 2014
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents.   a) The Waves, South Little Rock Ave., Ventnor:  On or about 04/3/2014, a WVM Construction, Inc. employee was observed working from the raised forks of a rough terrain fork lift (RTFL), installing sheathing with a pneumatic nail gun and hammer. The employee was not wearing eye protection and was thus exposed to potential eye injury from flying chips or shrapnel.   b) The Waves, South Little Rock Ave., Ventnor:  On or about 04/3/2014, a WVM Construction, Inc. employee was observed cutting plywood sheathing with a Makita circular saw.  The employee was not wearing eye protection and was thus exposed to potential eye injury from flying wood chips.   NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • · Z (S) $2000

1926.416 E01

Serious Gravity 5 2 instances 1 exposed
Issued
May 21, 2014
Abate by
Jun 17, 2014
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used:   a) The Waves, South Little Rock Ave., Ventnor:  On or about 04/3/2014, a WVM Construction, Inc. employee was observed cutting plywood sheathing with a Makita circular saw.  The saw's power cord was damaged and the conductors were exposed, thus exposing the employee to electrical shock hazards.     b) The Waves, South Little Rock Ave., Ventnor:  On or about 04/3/2014, a WVM Construction, Inc. employee was observed cutting plywood sheathing with a Makita circular saw.  The extension cord powering the saw was damaged and the conductors were exposed, thus exposing the employee to electrical shock hazards.     NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • · Z (S) $1600

1926.451 C02 V

Serious Gravity 10 1 instance 1 exposed
Issued
May 21, 2014
Abate by
Jun 17, 2014
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.451(c)(2)(v): Fork-lifts were used to support scaffold platforms while the entire platform was not attached to the fork:     a) The Waves, South Little Rock Ave., Ventnor:  On or about 04/3/2014, a WVM Construction, Inc. employee was observed working from the raised forks of a rough terrain fork lift (RTFL), using an unsecured pallet as his walking working platform.   NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • · Z (S) $2800

1926.451 G01

Serious Gravity 10 1 instance 1 exposed
Issued
May 21, 2014
Abate by
Jun 17, 2014
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level:  a) The Waves, South Little Rock Ave., Ventnor:  On or about 04/3/2014, a WVM Construction, Inc. employee was observed working from the raised forks of a rough terrain fork lift (RTFL), using an unsecured pallet as his walking working platform.  The employee was not using fall protection and was thus exposed to a fall hazard of approximately 16 feet.   NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • · Z (S) $2800

View WVM Construction, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339662504.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.