OSHA Inspection: ATF CONTRACTOR, LLC

Issued

Jul 18, 2014

Abate by

Aug 13, 2014

Penalty

Initial $2,800 · Current $1,800 Reduced

General-duty citation text

29 CFR 1926.1053(b)(1): Where (a) portable ladder(s) was/were used for access to an upper level landing surface and the ladder's length did not allow the ladder side rails to extend at least 3 feet (0.9 m) above the upper landing surface being accessed, the ladder was not secured at its top to a rigid support that will not deflect, and/or a grasping device was not provided to assist employees in mounting and dismounting the ladder:    (a) ATF Contracting, LLC - 1513 Cromwell Street, Wyomissing, PA - The employees were using a 30 foot metal extension ladder which was not secured at the top to gain access to the roof where it was approximately 20 feet high, on or about June 4, 2014.     Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.

Issued

Jul 18, 2014

Abate by

Aug 13, 2014

Penalty

Initial $5,600 · Current $3,200 Reduced

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):     (a) ATF Contractor, LLC - 1315 Cromwell Street, Wyomissing, PA - The employer did not ensure the use of fall protection for the six (6) employees working on the roof who were exposed to a 10 foot 10 fall, on or about June 9, 2014.    The ATF Contractor, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 558258, citation number 1, item number 2 and was affirmed as a final order on September 10, 2012, with respect to a workplace located at Wyngate at Medford, Lot 44, 42 Moorlinch Boulevard, Medford, NJ 08055.     Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.