Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: JA GENERAL CONSTRUCTION LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JA GENERAL CONSTRUCTION LLC in 11-19 MORRIS LANE, CRANBURY, NJ 08512 (NAICS 238170). OSHA activity number 341293645.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch JA General Construction LLC — free Get an email when a new federal OSHA severe-injury report for JA General Construction LLC is published. One employer, no account, unsubscribe in one click.
Site address
11-19 MORRIS LANE
City
CRANBURY
State
NJ
ZIP
08512
Mailing
224 BALDWIN TERRACE, ORANGE, NJ 07050
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238170
Employees
6
Ownership type
A

6 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 29, 2016
Abate by
May 9, 2016
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents.   a) 11-19 Morris Lane, Cranbury, NJ 07050     Employees who were operating the DeWalt table saw were not provided with and required to wear eye protection.
Recent events (1)
  • — Z (S) $2000

1926.300 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 29, 2016
Abate by
May 9, 2016
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use:  a) 11-19 Morris Lane, Cranbury, NJ 07050    The DeWalt DWE 7491 table saw, which was being used to cut sections of composite boards, was not equipped with an adjustable hood type guard.
Recent events (1)
  • — Z (S) $2800

1926.451 C02 I

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 29, 2016
Abate by
May 9, 2016
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.451(c)(2)(i): Footings were not level, sound, rigid, and capable of supporting the loaded scaffold without settling or displacement:   a) 11-19 Morris Lane, Cranbury, NJ 07050    The supporting poles of the pump jack scaffolding did not rest on baseplates or other firm foundations.
Recent events (1)
  • — Z (S) $2000

1926.451 F07

Serious Gravity 5 1 instance 4 exposed
Issued
Apr 29, 2016
Abate by
May 18, 2016
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration.  Such activities were not performed only by experienced and trained employees selected for such work by the competent person.   a) 11-19 Morris Lane, Cranbury, NJ 07050     The employer did not ensure that the three pump jack scaffolds had been inspected by a competent person prior to allowing employees to begin working from them.
Recent events (1)
  • — Z (S) $2000

1926.452 J02

Serious Gravity 5 3 instances 4 exposed
Issued
Apr 29, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.452(j)(2): Poles were not secured to the structure by rigid triangular bracing or equivalent at the bottom, top, and other points as necessary.   a) 11-19 Morris Lane, Cranbury, NJ 07050     The support poles of the three pump jack scaffolds were not adequately braced at the bottom.
Recent events (1)
  • — Z (S) $0

1926.451 G01 VII

Serious Gravity 10 2 instances 4 exposed
Issued
Apr 29, 2016
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section.   11-19 Morris Lane, Cranbury, NJ 07050     a) The two aluminum pump jack scaffolds that had been erected along the front (North) side were not equipped with an adequate fall protection system along the ends of the scaffold and exposed employees to fall hazards of approximately 12 feet.    b)  The aluminum pump jack scaffold that had been erected along the side (West side) was not equipped with an adequate fall protection system and exposed employees to fall hazards of approximately 17 feet.
Recent events (1)
  • — Z (S) $2800

View JA General Construction LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341293645.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.