Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LEVEL EDGE CONSTRUCTION, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of LEVEL EDGE CONSTRUCTION, LLC in CENTRE SQUARE FIRE DEPARTMENT 1298 WEST SKIPPACK PIKE, BLUE BELL, PA 19422 (NAICS 236220). OSHA activity number 342343985.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Level Edge Construction, LLC — free Get an email when a new federal OSHA severe-injury report for Level Edge Construction, LLC is published. One employer, no account, unsubscribe in one click.
Site address
CENTRE SQUARE FIRE DEPARTMENT 1298 WEST SKIPPACK PIKE
City
BLUE BELL
State
PA
ZIP
19422
Mailing
65 PROSPECT ROAD, STRASBURG, PA 17579
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
5
Ownership type
A

3 citations on file for this inspection.

1926.28 A

Serious Gravity 5 1 instance 5 exposed
Issued
May 30, 2017
Penalty
Initial $1,662 · Current $1,000 Reduced
29 CFR 1926.28(a): Appropriate personal protective equipment was not worn by employee(s) in all operations where there was exposure to hazardous conditions:    a) Centre Square Fire Station, Worksite - on or about May 18, 2017, employees are performing frame carpentry work on a commercial construction project, while using pneumatic framing nailers, without utilizing any means of eye protection.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $1662

1926.503 C03

Serious Gravity 10 1 instance 5 exposed
Issued
May 30, 2017
Abate by
Jun 9, 2017
Penalty
Initial $3,422 · Current $2,000 Reduced
29 CFR 1926.503(c)(3):     Inadequacies in an affected employee's knowledge or use of fall protection systems or equipment indicate that the employee has not retained the requisite understanding or skill.  Note: The following appendices to subpart M of this part serve as non-mandatory guidelines to assist employers in complying with the appropriate requirements of subpart M of this part.  [59 FR 40738, Aug. 9, 1994; 60 FR 5131, Jan. 26, 1995]    a) Centre Square Fire Station, Worksite - on or about May 18, 2017, employees are performing frame carpentry work on a commercial construction project, approximately 18 feet above grade, without utilizing any means of fall protection.    Abatement certification and documentation required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement.  Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photograph or video evidence of abatement or other written records.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $3422

1926.1051 A

Serious Gravity 5 2 instances 5 exposed
Issued
May 30, 2017
Abate by
Jun 9, 2017
Penalty
Initial $0 · Current $0
29 CFR 1926.1051(a): Stairways or ladders were not provided at all personnel points of access where there was a break in elevation of 19 inches (48 cm) or more, and no ramp, runway, sloped embankment, or personnel hoist was provided:  a) Centre Square Fire Station, Worksite - on or about May 18, 2017, employees are performing frame carpentry work on a commercial construction project, approximately 18 feet above grade, while accessing the upper working surfaces by climbing the exterior framing.    b) Centre Square Fire Station, Worksite - on or about May 18, 2017, employees are performing frame carpentry work on a commercial construction project, while accessing the upper working surface by climbing the guardrails of a scissor lift and onto lower chord of the trusswork, a difference of approximately 42 inches.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Level Edge Construction, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342343985.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.