FREMONT, OH —
OSHA Inspection: CROWN BATTERY MFG. CO.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CROWN BATTERY MFG. CO. in 1445 MAJESTIC DRIVE, FREMONT, OH 43420 (NAICS 335911). OSHA activity number 343983680.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CROWN BATTERY MFG. CO.
- Site address
- 1445 MAJESTIC DRIVE
- City
- FREMONT
- State
- OH
- ZIP
- 43420
- Mailing
- P. O. BOX 990, FREMONT, OH 43420
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 335911
- Employees
- 400
- Ownership type
- A
Citations
2 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 2, 2019
- Abate by
- Dec 9, 2020
- Penalty
- Initial $9,472 · Current $7,250 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: a) OSH Act of 1970 Section (5)(a)(1): On or about April 29, 2019, the employer did not ensure that an employee was protected from injury while making an adjustment on the sensor on the basket on the Rotary MAC C.O.S machine.
Recent events (3)
- — F (S) $7250
- — C (S) $9472
- — Z (S) $9472
1910.147 D
- Issued
- Aug 2, 2019
- Abate by
- Sep 18, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): a) On or about April 29, 2019, the employer did not ensure that employees utilized energy control procedures prior to making an adjustment to a sensor on the basket on the Rotary MAC C.O.S. machine (Serial No. 1021R). The energy sources were not isolated prior to engaging in this activity. As a result, the remaining applicable energy control elements, involving machine isolation [1910.147(d)(3)], lock-out/tag-out device application [1910.147(d)(4)], dissipation of residual energy [1910.147(d)(5)], and verification of isolation [1910.147(d)(6)], are not implemented to protect employees from machine servicing hazards such as, but not limited to, adjusting sensors.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
More inspections at Crown Battery MFG. CO.
View Crown Battery MFG. CO.'s full OSHA safety record →
More inspections in this industry (NAICS 335911)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343983680.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.