Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: AMERICAN ALUMINUM EXTRUSION COMPANY, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of AMERICAN ALUMINUM EXTRUSION COMPANY, LLC in 5253 MCCURRY RD, ROSCOE, IL 61073 (NAICS 236220). OSHA activity number 344095039.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch American Aluminum Extrusion Company, LLC — free Get an email when a new federal OSHA severe-injury report for American Aluminum Extrusion Company, LLC is published. One employer, no account, unsubscribe in one click.
Site address
5253 MCCURRY RD
City
ROSCOE
State
IL
ZIP
61073
Mailing
5253 MCCURRY RD, ROSCOE, IL 61073
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
206
Ownership type
A

7 citations on file for this inspection.

1926.20 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 6, 2019
Abate by
Jan 7, 2020
Penalty
Initial $10,419 · Current $6,251 Reduced
29 CFR 1926.20(b)(1): The employer did not initiate and maintain such programs as may be necessary to comply with this part.    On or about June 13 2019, employees were exposed to fall hazards while working adjacent to a roof opening at least 31 feet above a floor below the opening.  The employer did not initiate and maintain programs that complied with this part.      Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (3)
  • — F (S) $6251.4
  • — C (S) $10419
  • — Z (S) $10419

1926.20 B02

Serious Gravity 10 1 instance 2 exposed
Issued
Dec 6, 2019
Abate by
Jan 7, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s)  On or about June 13, 2019, the employer did not initiate or provide for job site inspections to be made by a competent person to detect hazards associated with job site conditions or equipment.   Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1926.451 F07

Serious Gravity 10 1 instance 1 exposed
Issued
Dec 6, 2019
Abate by
Jan 7, 2020
Penalty
Initial $13,260 · Current $7,956 Reduced
29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration. Such activities were not performed only by experienced and trained employees selected for such work by the competent person.    On or about June 13, 2019, the scaffold platform spanning the roof opening was not erected under the supervision of a competent person qualified in scaffold erection, which resulted in reduced stability of the scaffold platforms, a partially planked platform and employee exposure to falls of at least 31 feet.    Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (3)
  • — F (S) $7956
  • — C (S) $13260
  • — Z (S) $13260

1926.451 G01

Serious Gravity 10 1 instance 1 exposed
Issued
Dec 6, 2019
Abate by
Jan 7, 2020
Penalty
Initial $13,260 · Current $7,956 Reduced
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level. Paragraphs (g)(1)(i) through (vii) of this section establish the types of fall protection to be provided to the employees on each type of scaffold.    On or about June 13, 2019, employees without fall protection were exposed to fall hazards of approximately 31 feet while working from a scaffold platform that was spanning an unprotected roof opening.     Abatement documentation is required for this item in accordance with the requirements of 29 CRF 1902.19(d).
Recent events (3)
  • — F (S) $7956
  • — C (S) $13260
  • — Z (S) $13260

1926.501 B04 I

Serious Gravity 10 1 instance 2 exposed
Issued
Dec 6, 2019
Abate by
Jan 7, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.501(b)(4)(i): Each employee on walking/working surfaces was not protected from falling through holes (including skylights), more than six feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes.  On or about June 13, 2019, employees without fall protection were exposed to fall hazards of approximately 31 feet while working adjacent to an unprotected roof opening.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1926.454 B

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 6, 2019
Abate by
Jan 7, 2020
Penalty
Initial $10,419 · Current $6,251 Reduced
29 CFR 1926.454(b): The employer did not have each employee involved in erecting, disassembling, moving, operating, repairing, maintaining, or inspecting a scaffold trained by a competent person to recognize any hazards associated with the work.    On or about June 13, 2019, employees were required to work on unsecured scaffold planks that had been erected over a roof opening.  The employer did not ensure each employee involved in the erection of the scaffold was adequately trained to recognize hazards associated with scaffold erection.      Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (3)
  • — F (S) $6251.4
  • — C (S) $10419
  • — Z (S) $10419

1926.503 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 6, 2019
Abate by
Jan 7, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.   On or about June 13, 2019, employees working adjacent to an unprotected roof opening were exposed to fall hazards of at least 31 feet and had not received training in how to recognize and minimize those hazards.    Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

View American Aluminum Extrusion Company, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344095039.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.