GREEN BAY, WI —
OSHA Inspection: THE MEDALCRAFT MINT, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of THE MEDALCRAFT MINT, INC. in 2660 W. MASON ST., GREEN BAY, WI 54303 (NAICS 332999). OSHA activity number 345618284.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE MEDALCRAFT MINT, INC.
- Site address
- 2660 W. MASON ST.
- City
- GREEN BAY
- State
- WI
- ZIP
- 54303
- Mailing
- 2660 W. MASON ST., GREEN BAY, WI 54303
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 67
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.217 C03 I E
- Issued
- Apr 8, 2022
- Penalty
- Initial $10,151 · Current $6,091 Reduced
General-duty citation text
29 CFR 1910.217(c)(3)(i)(e):Point of operation devices shall protect the operator by requiring application of both of the operator's hands to machine operating controls and locating such controls at such a safety distance from the point of operation that the slide completes the downward travel or stops before the operator can reach into the point of operation with his hands. On or about November 4, 2021, at an establishment located at 2660 Mason Street Green Bay, Wisconsin, employees were exposed to potential caught-in and crushing hazards when the two-handed control used as a point of operation guard on the Rousselle Model 10, 110 Ton, Part Revolution Mechanical Power Press was not located a safe distance from the point operation and would allow the operator to reach the point of operation before downward travel of the slide stopped.
Recent events (2)
- — I (S) $6090.6
- — Z (S) $10151
1910.217 C05 I
- Issued
- Apr 8, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(c)(5)(i): The employer shall use a control system and a brake monitor which comply with paragraphs (b)(13) and (14) of this section; On or about October 28, 2021, the Rousselle Model 10, 110 Ton, Part Revolution Mechanical Power Press did not have a control system and brake monitor installed when employees were required to place hands in die exposing employees to crushing hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 E01
- Issued
- Apr 8, 2022
- Abate by
- May 6, 2022
- Penalty
- Initial $10,151 · Current $6,091 Reduced
General-duty citation text
29 CFR 1910.217(e)(1): Inspection and maintenance records. The employer shall establish and follow an inspection program having a general component and a directed component: On or about November 4, 2021, at an establishment located at 2660 Mason Street Green Bay, Wisconsin, the employer did not follow an inspection program including periodic and regular inspections of the Rousselle Model 10, 110 Ton, Part Revolution Mechanical Power Press, Serial Number 25960. The last monthly inspection of the Rousselle Model 10, 110 Ton, Full Revolution Mechanical Power Press, Serial Number 25960 took place on June 1, 2020.
Recent events (2)
- — I (S) $6090.6
- — Z (S) $10151
1910.217 E01 I
- Issued
- Apr 8, 2022
- Abate by
- May 6, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(e)(1)(i):It shall be the responsibility of the employer to establish and follow a program of periodic and regular inspections of his power presses to ensure that all their parts, auxiliary equipment, and safeguards are in a safe operating condition and adjustment. The employer shall maintain a certification record of inspections which includes the date of inspection, the signature of the person who performed the inspection and the serial number, or other identifier, of the power press that was inspected. On or about November 4, 2021, at an establishment located at 2660 Mason Street Green Bay, Wisconsin, the employer did not follow a program of periodic and regular inspections of their power presses to ensure that all their parts, auxiliary equipment, and safeguards are in a safe operating condition and adjustment. The last inspection of the Rousselle Model 10, 110 Ton, Part Revolution Mechanical Power Press, Serial Number 25960 took place on June 1, 2021.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 E01 II
- Issued
- Apr 8, 2022
- Abate by
- May 6, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(e)(1)(ii): It shall be the responsibility of the employer to establish and follow a program to inspect and test each press on a regular basis at least once a week to determine the condition of the clutch/brake mechanism, anti-repeat feature, and single-stroke mechanism. The employer shall maintain a certification record of each maintenance task performed under the directed component of the inspection program that includes the date of the maintenance task, the signature of the person who performed the maintenance task, and the serial number, or other identifier of the power press maintained: On or about November 4, 2021, at an establishment located at 2660 Mason Street Green Bay, Wisconsin, the employer did not follow a program to inspect and test, on an at least weekly basis, to determine the condition of the clutch/brake mechanism, anti-repeat feature, and single-stroke mechanism for each partial revolution and full revolution mechanical power press operated in the press and forming departments.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at The Medalcraft Mint, INC.
View The Medalcraft Mint, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345618284.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.