PROVIDENCE, RI —
OSHA Inspection: JMT CARPENTRY & SIDING INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JMT CARPENTRY & SIDING INC. in 4 SMITHFIELD ROAD, PROVIDENCE, RI 02940 (NAICS 238160). OSHA activity number 347440208.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JMT CARPENTRY & SIDING INC.
- Site address
- 4 SMITHFIELD ROAD
- City
- PROVIDENCE
- State
- RI
- ZIP
- 02940
- Mailing
- 28 CHURCH ST., MILFORD, MA 01757
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 7
- Ownership type
- A
Citations
4 citations on file for this inspection.
1903.19 C01
- Issued
- Oct 21, 2024
- Abate by
- Nov 22, 2024
- Penalty
- Initial $427 · Current $427
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: (a) Establishment: As of October 21, 2024, the employer had not certified to OSHA that the abatement had been completed for Citation 1, Item 2 from inspection number 1744020, issued on 7/24/2024, with a final order date of 8/28/2024.
Recent events (1)
- — Z (O) $427
1903.19 D01
- Issued
- Oct 21, 2024
- Abate by
- Nov 22, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required. (a) Establishment: As of October 21, 2024, the employer had not provided the required abatement documentation to OSHA for Citation 1, Item 2 from inspection number 1744020, issued on 7/24/2024, with a final order date of 8/28/2024.
Recent events (1)
- — Z (O) $0
1926.501 B13
- Issued
- Jul 24, 2024
- Penalty
- Initial $88,721 · Current $88,721
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employees provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b). (a) Worksite: On or about 04/25/2024, employees were exposed to fall hazards while installing and handling roofing materials, at a height of approximately 18 feet above the lower level, without any means of fall protection. JMT Carpentry & Siding Inc. was previously cited for a violation of this occupational safety and health standard, which was contained in OSHA inspection number 1429863, citation number 1, item number 1, and was affirmed as a final order on 04-27-2021, with respect to a workplace located at Dixon Street off Shannon Street, Fall River, MA 02720
Recent events (1)
- — Z (R) $88721
1926.503 B01
- Issued
- Jul 24, 2024
- Abate by
- Sep 9, 2024
- Penalty
- Initial $1,423 · Current $1,423
General-duty citation text
29 CFR 1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. (a) Worksite: On or about 04/25/2024, the employer did not prepare a written certificate of fall protection training for employees working on a residential roofing project prior to exposing them to a fall hazard of approximately 18 feet in height.
Recent events (1)
- — Z (O) $1423
More inspections at JMT Carpentry & Siding INC.
View JMT Carpentry & Siding INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238160)
More inspections in RI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347440208.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.