FRANKLIN, OH —
OSHA Inspection: DYNOS GROUP GMBH
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DYNOS GROUP GMBH in 1000 ANDERSON STREET, FRANKLIN, OH 45005 (NAICS 322121). OSHA activity number 347691099.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DYNOS GROUP GMBH
- Site address
- 1000 ANDERSON STREET
- City
- FRANKLIN
- State
- OH
- ZIP
- 45005
- Mailing
- P.O. BOX 215, FRANKLIN, OH 45005
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322121
- Employees
- 120
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.176 B
- Issued
- Jan 14, 2025
- Abate by
- Feb 3, 2025
- Penalty
- Initial $14,518 · Current $8,711 Reduced
General-duty citation text
29 CFR 1910.176(b):Secure storage. Storage of material shall not create a hazard. Bags, containers, bundles, etc., stored in tiers shall be stacked, blocked, interlocked and limited in height so that they are stable and secure against sliding or collapse. a) On or about August 15, 2024 the employer did not ensure that the stacks of finished product in the finishing room weighing approximately 800-1500lbs, were stored in a stable manner of being stacked, blocked, interlocked and limited in height to secure from sliding or collapse on employees working in the Finishing Department.
Recent events (2)
- — I (O) $8710.6
- — Z (S) $14518
1910.261 K01
- Issued
- Jan 14, 2025
- Penalty
- Initial $10,372 · Current $6,223 Reduced
General-duty citation text
29 CFR 1910.261(k)(1):Emergency stops. Paper machines shall be equipped with devices that will stop the machine quickly in an emergency. The devices shall consist of push buttons for electric motive power (or electrically operated engine stops), pull cords connected directly to the prime mover, control clutches, or other devices, interlocked with adequate braking action. The devices shall be tested periodically by making use of them when stopping the machine and shall be so located that any person working on the machine can quickly disconnect the machine from the source of power in case of emergency. a.) On or about August 15, 2024, the employer did not ensure that all of the estops on the Twin Wire Press were equipped with a working estop device that would stop the machine quickly in the event of an emergency in that one of the estops was broken next to the area where the employees stand when relocating the product from one section at the wet end.
Recent events (2)
- — I (S) $6223.2
- — Z (S) $10372
1910.261 K02 II
- Issued
- Jan 14, 2025
- Abate by
- Feb 3, 2025
- Penalty
- Initial $8,296 · Current $0 Reduced
General-duty citation text
29 CFR 1910.261(k)(2)(ii): All ends of rotating shafts including dryer drum shafts shall be completely guarded. a.) On or about August 15th, 2024, the employer did not ensure that all parts of the rotating shaft were completely guarded on rotary 4 in the rotary room.
Recent events (2)
- — I (S) $0
- — Z (S) $8296
1910.22 A02
- Issued
- Jan 14, 2025
- Abate by
- Jun 10, 2025
- Penalty
- Initial $24,890 · Current $8,711 Reduced
General-duty citation text
29 CFR 1910.22(a)(2): The floor of each workroom is maintained in a clean and, to the extent feasible, in a dry condition. When wet processes are used, drainage must be maintained and, to the extent feasible, dry standing places, such as false floors, platforms, and mats must be provided. a) On or about August 14, 2024, the employer did not adequately maintain the flooring in the Rotary Room in a clean and dry condition in that the platform, stairs, rails, and floor had pulp material that presented slip, trip, and fall hazards for employees during production. Cheney Dynos was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.22(a)(2), which was contained in OSHA inspection number 1682064, citation number 1, item number 2 and was affirmed as a final order on 11/16/23, with respect to a workplace located at 1000 Anderson Street FRANKLIN, OH 45005
Recent events (2)
- — I (S) $8710.8
- — Z (R) $24890
1910.261 C15 III
- Issued
- Jan 14, 2025
- Abate by
- Jun 10, 2025
- Penalty
- Initial $414 · Current $249 Reduced
General-duty citation text
29 CFR 1910.261(c)(15)(iii): All conveyors for pulpwood shall have the in running nips between chain and sprockets guarded; also, turning drums shall be guarded. a.) On or about August 13, 2024, the employer did not ensure that the drum and chain on the dry end of the twin wire press were adequately guarded. Cheney Dynos was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.261(c)(15)(iii), which was contained in OSHA inspection number 1678060 , citation number 1, item number 1-a, and was affirmed as a final order on 11/15/2023, with respect to a workplace located at 1000 Anderson Street FRANKLIN, OH 45005.
Recent events (2)
- — I (R) $248.6
- — Z (R) $414
1910.22 A03
- Issued
- Jan 14, 2025
- Abate by
- Feb 3, 2025
- Penalty
- Initial $1,165 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(a)(3): Walking-working surfaces are maintained free of hazards such as sharp or protruding objects, loose boards, corrosion, leaks, spills, snow, and ice. a) On or about August 15th, 2024, the employer did not ensure that the exit stairs from the cotton room to the outside of the facility were in a safe condition in that the stairs are rusting and corroding with visible holes in the stairs.
Recent events (2)
- — I (O) $0
- — Z (O) $1165
More inspections at Dynos Group Gmbh
View Dynos Group Gmbh's full OSHA safety record →
More inspections in this industry (NAICS 322121)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347691099.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.